ebinmaine 81,119 #26 Posted October 25 13 minutes ago, sjoemie himself said: Good advice. Is there a repair kit available that you know of? Some of the K series carbs can have a bushing put in at the top. I have not seen a Magnum with this capability though. 1 Share this post Link to post Share on other sites
sjoemie himself 3,270 #27 Posted October 25 Could'nt help myself and cleaned, sanded, primed the first of the four rims.. Reminded me of how much I despise sanding. Three more to go Cheated a bit.. but figured it'll be fine. When everything goes well these will be mounted in the upcoming week. 1 2 Share this post Link to post Share on other sites
sjoemie himself 3,270 #28 Posted Wednesday at 09:37 PM Well, famous last words in the previous post..anyhow.. I did finally manage to get the tires mounted with not even that many rage inducing moments The mounting in itself was alright but unfortunately I did damage the rims a tiny bit. I can't understand why there's no cheap tool yet to easily mount small tires like this without damaging the rim. I looked at a bunch of YT tutorials but 99% seem to just ram a tire iron in there and call it good. **rant mode off** I'm hoping for a bit higher temps going into the wekend so I can do a bit of touch-up and get the wheels mounted. I like the white a lot more than I though I would. Hard to keep clean probably but that's OK. 2 1 Share this post Link to post Share on other sites
Handy Don 17,662 #29 Posted Thursday at 01:38 AM 3 hours ago, sjoemie himself said: I did damage the rims a tiny bit. That wheel/tire set looks just great! I patronize a local shop that has a small wheel adapter for their tire-mounting machine for the front tires--the 12 inch rears don’t need it. They usually charge me $10 per tire (and sometimes they just waive the charge). Yes, the machine leaves marks on the painted rims (sigh) but I’ve gotten good at touching them up. And, no stress for me. 1 Share this post Link to post Share on other sites
sjoemie himself 3,270 #30 Posted Thursday at 11:47 AM 10 hours ago, Handy Don said: charge me $10 per tire Hard to beat that price! I do have a local shop that I trust with my rims any day of the week but even he had to give up on the small lawnmower tires. Too small and too stubborn/ridgid for his machine. Share this post Link to post Share on other sites
JCM 11,449 #31 Posted 19 hours ago At the September Meet here in Maine @Handy Don walked over to the Farmall Super A to check it out. I mentioned to him that the fuel bowl was problematic for as long as I can remember. He recommended to replace the original. I've been happy with everything that came from Steiner tractor so why not buy a complete new one. Happy to say it worked. I did have my doubts at first. Thank You Don 4 Share this post Link to post Share on other sites
953 nut 70,277 #32 Posted 5 hours ago On 11/11/2026 at 4:37 PM, sjoemie himself said: I can't understand why there's no cheap tool yet to easily mount small tires like this without damaging the rim. I looked at a bunch of YT tutorials but 99% seem to just ram a tire iron in there and call it good My answer to the lack of a proper machine to mount 8" tires is a 3/4 all thread rod through my workbench and the fingers from an old leather glove placed over the tirer irons. Share this post Link to post Share on other sites
Handy Don 17,662 #33 Posted 1 hour ago 17 hours ago, JCM said: I did have my doubts at first. Thank You Don Yay! No drippy = happy! Just reassure any other parts that may be jealous of the new that you still love them! Share this post Link to post Share on other sites