Couldn't pass it up

[BPEisenhower 603]

Hello Horse fans. We've all had a chance to get something cheap enough for no reason so, why not. And people say $50 don't buy much. However, it does buy a C120 sitting for 15 years. New battery and fuel line was all it took. Will get a bath and better pictures tomorrow! 

[JERSEYHAWG / Glenn 4,590]

Cant wait to it again. Your scored big time. 

[ebinmaine 80,600]

Good catch! 

[SylvanLakeWH 32,457]

[ri702bill 12,976]

Nice score... how's the Automatic?

You bought a mule drive & got a free tractor & deck!

[oliver2-44 11,732]

Great find!

Tires even look good.

Is the paint all original?

[parsonsponyz 407]

Nice score.  Looks like really nice tractor

 

Glad there's not a lot of deals like that around here or I would have to make the stables larger. 

[BPEisenhower 603]

Early morning with the Hotsy. Big believer in Citri Blast and Cascade. I did get everything cleaned and I think it's a good candidate for a repaint. No dents or holes. Surface rust isn't bad but, I do like the wet look. LoL 🤣. Also, I did get the original rear tires with it and do hold air, no cracking. I can see myself adding more C series to the collection. Show more pictures later! Enjoy your morning Horse fans! 🌞 Apologies for the hazy photos but I had my washer set at 280°. Can't stand greasy build up!

[peter lena 10,046]

@BPEisenhower  very often suggest , getting  paint recovery  started  ASAP , like penetrating oil  total spray down , let it sit  for weeks  , to penetrate and establish easier base , rub out , sun heat is best for absorption  , but a darker shade is showing you the way ,  this is regular  stuff for me , gently do it in stages , finish with a  6" electric  palm buffer , cleaner wax , TRY A SMALL  test  area . pete  

 

[BPEisenhower 603]

1 hour ago, peter lena said:

@BPEisenhower  very often suggest , getting  paint recovery  started  ASAP , like penetrating oil  total spray down , let it sit  for weeks  , to penetrate and establish easier base , rub out , sun heat is best for absorption  , but a darker shade is showing you the way ,  this is regular  stuff for me , gently do it in stages , finish with a  6" electric  palm buffer , cleaner wax , TRY A SMALL  test  area . pete  

 

I often wondered if a lubricant of some type would help. Considering that everything that was caked in grease was preserved underneath. However, someone did rattle can the right fender 🤬. Definitely going to change motor oil and figure out what type of ATF is best in rear end. Also, need to locate the engine screen. Magnum plastic don't look correct and, it has the original muffler turned out.... I'm picky but it must be correct since it's there! LMAO 🤣. Thank you for the advice, I'm grabbing a gallon of WD and spray bottles 

 

[8ntruck 9,277]

If the muffler is original, it is not mounted properly.  The stock muffler mounts roughly vertically in front of the engine with the exhaust exiting the left side.

[sqrlgtr 3,860]

7 hours ago, BPEisenhower said:

Also, need to locate the engine screen. Magnum plastic don't look correct

I agree and may have an extra screen ( will have to check) yours for $5 dollars plus shipping if you promise to fix muffler.