WHX?? 58,048 #1 Posted 15 hours ago Still working on the neighbor's Ariens GT-20. Deck is run off the front PTO via 2 v belts to a jack shaft that runs through the front axle to a drive shaft that spins the deck. IPL call for two 4L-34s. Found this place https://www.gprindustrial.com/en/ that offers the belt with the Ariens part number for a really good price. Hind sight now I shoulda just went to TSC but right to my door for two? So the order arrives and of course they sent 5L-34s. So after many unanswered emails & phone calls I finally get a response. They are trying to tell me these are the correct belts. Share this post Link to post Share on other sites
WHX?? 58,048 #2 Posted 15 hours ago So I sent them these pics pretty much says it all right? Quite clear the pullies are for 4L belts right? Be interesting to see what their response will be. 3 Share this post Link to post Share on other sites
squonk 48,056 #3 Posted 5 hours ago Buy local when possible. Usually worth it most of the time when you add in shipping and aggravation. Yup Napa crosses to a 4l340. Their info is only as good as the person who entered it Share this post Link to post Share on other sites
ri702bill 12,976 #4 Posted 5 hours ago 16 minutes ago, squonk said: Their info is only as good as the person who entered it Ain't that the truth. Only as good as the person who cares to enter it... And a dyslexic parts counter person is in the wrong profession! Share this post Link to post Share on other sites
WHX?? 58,048 #5 Posted 3 hours ago (edited) 1 hour ago, squonk said: Buy local when possible. Would absolutely love to but when the nearest place is 40 miles away and the price of diesel??? I guess belts are not the thing to buy online no matter how good a deal. Worse part is I kinda knew this. Edited 3 hours ago by WHX?? Share this post Link to post Share on other sites
peter lena 10,046 #6 Posted 3 hours ago @WHX?? often suggest , feeling / sensing how easily , every related pulley , spindle moves ? THATS WHAT EATS BELTS ALIVE ! rough , not smooth silent , is showing you the way ! incremental , ( tiny pulley stoppage , from , LUBRICATION FAILURE , IS THE CAUSE OF THAT ! might be a good tine to enhance , function , pete Share this post Link to post Share on other sites
squonk 48,056 #7 Posted 3 hours ago 21 minutes ago, WHX?? said: Would absolutely love to but when the nearest place is 40 miles away and the price of diesel??? I guess belts are not the thing to buy online no matter how good a deal. Worse part is I kinda knew this. Napa and TSC are 40 miles away? You live on top of a volcano or sonethin? If you knew the IPL said 4L34, why not just order those and not give the guys at the belt place the OE # with the chance to screw it up? Share this post Link to post Share on other sites
adsm08 5,118 #8 Posted 3 hours ago 16 minutes ago, squonk said: Napa and TSC are 40 miles away I looked them up. That's a round trip distance. The closest Napa I found was in Ripton, roughly 20 miles from Princeton. The nearest TSC is in Berlin, about 17 miles away. Share this post Link to post Share on other sites
JoeM 10,244 #9 Posted 2 hours ago Gzzzzz uncle Jim, everyone has a couple 4L340 belts laying around. Now you got to get something that uses 5L340 belts! I have been getting my belts from Amazon. A little more but returns are easy. My TSC store belt selection stinks, have to call ahead and tell them go look please cause lots of time there is stock showing but no stock. I have noticed they stopped carrying the longer ones. RK has a nice belt assortment but it too is 30 miles one way. I am sure with your calculated attitude the "Air in thems" with purr like a Rolex someday. Or maybe like a rolodex? Share this post Link to post Share on other sites
