Bar Nuthin 3,118 #1 Posted 19 hours ago (edited) This 754 I picked up has had the throttle cable replaced, but I feel like it is way too long and needs to be shortened up. I'm hoping someone could post some photos that show the correct routing of the throttle cable. Additionally, the thing only had about 1" of travel, so basically idle or wide open. Upon investigation, I found they had governor jerry rigged to compensate for a broken governor spring. (new spring on the way) click for video ===>>> Edited 19 hours ago by Bar Nuthin Share this post Link to post Share on other sites
Retired Wrencher 6,959 #2 Posted 12 hours ago You can cut to length then get you self a Z bender I believe that is what they call it. It crimps to original shape. I have had mine for years works well. 2 Share this post Link to post Share on other sites
Achto 32,557 #3 Posted 11 hours ago 7 hours ago, Bar Nuthin said: I'm hoping someone could post some photos that show the correct routing of the throttle cable. 4 Share this post Link to post Share on other sites
