Lubriplate

[CRF857 585]

I have a gallon of Lubriplate FMO 500.

Am wondering if it would be good to use on the underside of the mowing deck.

 

[peter lena 10,018]

@CRF857  been doing hot sun /  lubrication  for years , number  one thing is totally  cleaning  out  any  debris , trapped ,  grass , personally  use a 2 stage soak in , like a chain and cable  spray , macs , napa, totally  soak down and heat bake , for  hours , set up mine for  best all day , sun angle , move as needed , then  over spray , with the heavier open gear oil , you can easily experiment , I also  winter store my decks like this , so  that  lubrication , becomes imbedded into the metal , was just checking the specs on your  lube , possible , but  its the lighter  initial hot soak in  , that  sets  the foundation  , of  rust free, pete 

 

[953 nut 68,559]

I used some brush on truck bed liner several years ago (probably 8 or 9) and it has held up well.            

[c-series don 12,367]

This has not really answered @CRF857’s question. I’d also like to know the answer to this because I have some of that same stuff that someone gave me. I never really knew what to do with it? Maybe I’ll use it on my decks? 

[SylvanLakeWH 32,158]

Can't hurt... expired in 2017, so either use it for bicycles chain oil or put it on the deck and see what happens...

 

[Ed Kennell 47,034]

I used Lubriplate for years to coat and waterproof carbon steel hydro turbine parts.  It sticks and holds up well     My main use now is to lube and waterproof bolt threads.