Dave D. 47 #1 Posted Saturday at 04:42 PM I thought that I would start a thread of this little tractor. Got a trailer hitch so I can pull it out of the container. Got some C-clips to secure the front wheels. Searching for a shift lever and now I'm working on the steering wheel. As it gets cooler, I'll get more done on this project. Gonna be a long term project. Thinking I'll flush the trans with diesel fuel and put Penetrol on the tractor for the patina. Looking at engine options. Liking the idea of a diesel or Predator just to get it going. More progress to come. Thanks for all the information and advice. The PC-7 will need more coats. Dave Dave 3 Share this post Link to post Share on other sites
702854boy 1,086 #2 Posted Saturday at 10:07 PM What happened to the steering wheel that it looks all melty? Share this post Link to post Share on other sites
Dave D. 47 #3 Posted yesterday at 07:20 PM That's the PC-7 I put on where the bakelite was missing. Hoping to sand it back smooth. Dave 1 Share this post Link to post Share on other sites
Dave D. 47 #4 Posted 1 hour ago Worked on the steering wheel today. Steering wheel is just about done. Dave 2 Share this post Link to post Share on other sites
Dave D. 47 #5 Posted 1 hour ago The hard part is getting the missing part round. Take a lot of hand sanding. Just a little more PC7 in 2 places. Dave Share this post Link to post Share on other sites
