squonk 47,801 #1 Posted Thursday at 04:28 PM When I first saw Dusty in the barn the first thing I did was to see if the engine would turn by hand. Barely!! Upon closer inspection the PTO pulley was stuck, the mule drive pulleys were stuck and the spindles were stuck. Yanking the deck off freed up all but the spindles. Using my old pitman arm puller and some spacers I was able to remove the blocks that the blades mount on I was able to dig out the farm Caa Caa that was binding things up. Got the tension slider working, So now it's off to Billy Bob the Welder for some patch work. 8 2 Share this post Link to post Share on other sites
Handy Don 17,217 #2 Posted Thursday at 04:51 PM 21 minutes ago, squonk said: Well that’s a pretty nifty tool. I suspect I’d have used one of those exactly never but I’m glad you had one! 1 1 Share this post Link to post Share on other sites
squonk 47,801 #3 Posted Thursday at 09:47 PM Hole to get fixed. 1 Share this post Link to post Share on other sites
squonk 47,801 #4 Posted 8 hours ago Hole grew to include this area. 1 Share this post Link to post Share on other sites
Sparky-(Admin) 26,195 #5 Posted 1 hour ago I have a couple 36”RD’s….one of my favorite decks Share this post Link to post Share on other sites
