Penetrol (Before and After)

[squonk 47,830]

I've always wanted to show a before and after comparison with Penetrol. So I gave Dusty the B-80 the business. 

 

Before:

 

 

 

After:

 

 

 

 

[ebinmaine 80,176]

Rag or something more aggressive? 

[squonk 47,830]

40 minutes ago, ebinmaine said:

Rag or something more aggressive? 

foam brush

[EB-80/8inPA 2,113]

I did the hood of the B-80 a couple weeks ago just to see how it would go.  Smeared it in evenly with a rag, let it set a while and rubbed off the excess.  It’s not as shiny looking as yours looks in the pics, but made a huge improvement   Now I gotta do a complete cleaning and treatment.  It’s good stuff!  No more dust catching oilings for me.

[ineedanother 2,789]

I use it and it stays tacky for a couple days but dries completely and seems to last. I've been tempted to wax over it to see what that does but haven't yet.

[John c 222]

I used penetrol on a C101 I did a few months ago, I was very impressed with the result. What was left of the original paint was to the point it was turning loose in little chips, so I ended up using steel wool to apply the penetrol and smooth it out some, it was pretty messy 

[ineedanother 2,789]

I use these routinely and recommend them...

[Beap52 2,429]

I've used pump up sprayer to apply Penetrol to my pickups for several years.  I spray it in places such as inner fenders, inside doors, door rockers, frame most anywhere I can get it. and I'm quite pleased with the results in protection from  rust.  I don't apply it to the paint 

 

What it does to the tractor finishes pictured is amazing. 

[Retired Wrencher 6,909]

Mike much better. Good job resto.