Simplecity 25 #1 Posted 15 hours ago (edited) Good Afternoon All Installed a Mule Drive on my Raider 12. For some reason, it just doesn't look right. The belt from the motor APPEARS like it will chafe on the front axle. I do not have belts or a deck (looking for a 42" rear discharge), I'm open for recommendations for both. Here are some pics. Edited 15 hours ago by Simplecity 1 Share this post Link to post Share on other sites
Simplecity 25 #2 Posted 15 hours ago Good Afternoon All Installed a Mule Drive on my Raider 12. For some reason, it just doesn't look right. The belt from the motor APPEARS like it will chafe on the front axle. I do not have belts or a deck (looking for a 42" rear discharge), I'm open for recommendations for both. Here are some pics. Share this post Link to post Share on other sites
c-series don 12,221 #3 Posted 14 hours ago No pictures are posted? Share this post Link to post Share on other sites
ri702bill 12,615 #4 Posted 14 hours ago It is a close fit on the C series to miss the axle... 1 Share this post Link to post Share on other sites
sqrlgtr 3,478 #5 Posted 11 hours ago its a Raider but close enough to a C series @ri702bill 4 hours ago, Simplecity said: Here are some pics. How you like them tri rib Firestone front tires? Share this post Link to post Share on other sites
Lee1977 7,726 #6 Posted 8 hours ago (edited) Here is the one I bolted on to my 71 raider 12 it works find. I used two 1/4" flats and one 1/8" flat as spacers between the frame and hitch. I had to cut off the hood hinges and bolt them back to the hitch. Edited 8 hours ago by Lee1977 Share this post Link to post Share on other sites
