Parts tractor or Project? C-160 Auto

[Bar Nuthin 2,735]

I have a chance to pick this tractor up locally for $200.  Deal or No Deal?

Sounds like it belonged to the seller's grandfather - so details are patchy. 

 

Based on her recollection of her grandfather's statement and the fact that the fan guard is off - I'm guessing the flywheel will need to come off. 

 

[ebinmaine 79,765]

It's worth the parts price alone. I don't know what the flywheel would have to do with spark unless the engine has been swapped.

[Bar Nuthin 2,735]

Just now, ebinmaine said:

It's worth the parts price alone. I don't know what the flywheel would have to do with spark unless the engine has been swapped.

Brain fart on my part. I was thinking magneto rather than battery ignition. A second cup of coffee is starting to clear the fog.

[pfrederi 20,921]

Could be bad stator

[Bar Nuthin 2,735]

4 minutes ago, pfrederi said:

Could be bad stator

Thank you - I'm a body and paint guy, not a mechanic - so I'm educating myself as I go.

If that's the case, could it also be a mis-diagnosed rectifier and low voltage?

I guess getting my hands on it and some time with the multimeter may tell the story.

Edited 8 hours ago by Bar Nuthin

[pfrederi 20,921]

26 minutes ago, Bar Nuthin said:

Thank you - I'm a body and paint guy, not a mechanic - so I'm educating myself as I go.

If that's the case, could it also be a mis-diagnosed rectifier and low voltage?

I guess getting my hands on it and some time with the multimeter may tell the story.

 

 

Her comment about wire wheel to clean up corrosion??maybe a bad ground somewhere

 

Bad stator would mean battery going dead 

[ebinmaine 79,765]

1 minute ago, pfrederi said:

bad ground

 

 

@Bar Nuthin

 

A bad ground will cause any number of sillyness occurrences 

[pfrederi 20,921]

Bottom line bad electronics are a cheap easy fix.  You got it home yet??

[Bar Nuthin 2,735]

Just now, pfrederi said:

You got it home yet??

Waiting on a pickup time. 

[Bill D 3,008]

New candidate for worst seat.  Definitely needs a bath.  Simple electrical system.   Should be an easy fix.

[sqrlgtr 3,355]

k341 if it aint locked up is worth asking price especially around these parts... steering wheel appears to bo in good shape also..

[Lee1977 7,716]

If it still has the  K341 you should save it. 74 or 75 hydro with a hydrolic lift. Only made C-160s from 1974 to 1977.

Simple electric system, easy to get to mid hitch set up. " They Don't Get  Any Better "

[ebinmaine 79,765]

2 hours ago, sqrlgtr said:

k341 if it aint locked up is worth asking price especially around these parts... 

 

The cylinder head alone is worth  $100.  

 

The whole K341 up here NOT running is a $300 piece.  

 

 

[Bar Nuthin 2,735]

1 hour ago, Lee1977 said:

74 or 75 hydro

Deep diving the photos online, it appears to be a '74 (flip-up fender pan). Twin to the '74 I currently own.

[Bar Nuthin 2,735]

1 hour ago, ebinmaine said:

 

The cylinder head alone is worth  $100.  

 

The whole K341 up here NOT running is a $300 piece.  

 

3 hours ago, Bill D said:

New candidate for worst seat.  Definitely needs a bath.  Simple electrical system.   Should be an easy fix.

 

Let us not forget the seat pan. That was what initially sparked my attention. I was looking for one to build an alternate seat for my sulky.

Plus, my growing collection of hydraulic lift components.

[ebinmaine 79,765]

42 minutes ago, Bar Nuthin said:

Deep diving the photos online, it appears to be a '74 (flip-up fender pan). Twin to the '74 I currently own.

 

Flip up seat pans could be had in 74, 75, and even very early 76 models.

[Bar Nuthin 2,735]

46 minutes ago, ebinmaine said:

 

Flip up seat pans could be had in 74, 75, and even very early 76 models.

I did not realize that. I figured it was just a holdover from the ‘73s