Up date on Throttle linkage. With part #`s

[Retired Wrencher 6,789]

 I have most of the linage for the 1057.  This controls the push pull system throttle on a 1057 and other models. This is the part where put the cable threw a locking collar, Then screw it down lock it down. Looking for the hole set up if any has one in good shape. Have P/N#`s Thanks in advance. These are the   P/N # 2368895 and 236947 this is for the push pull throttle.  Let me know if you have these parts or the hole control that hooks up to the governor Thanks in advance.

Edited July 16 by Retired Wrencher

[Retired Wrencher 6,789]

Ok after much research I found this. This the end of the gov/ throttel control. This what I am looking for. This group “13 Any buddy have extra one.It would be a big thank you.. Or if you have the hole assembly I would use that also. What ever you have.

Edited July 12 by Retired Wrencher

[Sparky-(Admin) 25,940]

Gary. 

  Make a list of all the part numbers from that diagram and email/message  @76c12091520h the list. 
 

[Retired Wrencher 6,789]

22 hours ago, Sparky said:

Gary. 

  Make a list of all the part numbers from that diagram and email/message  @76c12091520h the list. 
 

Thanks Mike.