Retired Wrencher 6,774 #1 Posted Saturday at 05:52 PM I have most of the linage for the 1057 but I could use be on the governor this controls the throttle on a 1057. This is the part where put the cable threw a locking collar, Then screw it down lock it down. Looking for the hole set up if any has one in good shape.Trying to find P/N#`s Thanks in advance. Share this post Link to post Share on other sites
Retired Wrencher 6,774 #2 Posted Sunday at 11:05 AM (edited) Ok after much research I found this. This the end of the gov/ throttel control. This what I am looking for. This group “13 Any buddy have extra one.It would be a big thank you.. Or if you have the hole assembly I would use that also. What ever you have. Edited Sunday at 11:09 AM by Retired Wrencher Share this post Link to post Share on other sites
Sparky-(Admin) 25,860 #3 Posted yesterday at 11:14 AM Gary. Make a list of all the part numbers from that diagram and email/message @76c12091520h the list. Share this post Link to post Share on other sites
Retired Wrencher 6,774 #4 Posted 8 hours ago 22 hours ago, Sparky said: Gary. Make a list of all the part numbers from that diagram and email/message @76c12091520h the list. Thanks Mike. Share this post Link to post Share on other sites
