Seat Replacement 1987-1989 414-8

[bradleydavidgood 16]

My bolt holes are 7.5" side to side and front to back are slots variable for about 5-10".

 

This is the most attractive seat I've found so far and has one bolt pattern that matches:

CountyLine 18.5 in. Kubota Tractor Seat

 

Another option, but no details on this one about bolt pattern options and if the seat comes apart to be able to drill new holes or relocate the rails.

 

GFYSHIP Universal Tractor Seat

 

Anyone replaced the seat with something they like that mounts well?

 

Thanks!

[sqrlgtr 3,163]

This seat came from TSC but was not a direct bolt on but I used the seat plate off of a junk craftsman mower I had. Notice it just has the one bigger bolt that holds the seat on but the seat rides in 2 v shaped groves in the craftsman seat plate. Very solid and still simple adjustability and is very comfortable. The best I remember it just barely wouldnt fit and you may be able to "massage" it into factory holes

Edited 20 hours ago by sqrlgtr

[squonk 47,254]

@76c12091520h has some super comfortable seats. May need some tweaks to mount but are worth the effort!

[953 nut 67,208]

When you talk to Lincoln at A to Z about the deck ask what he as for seats, may be able to fix you up.

[clueless 3,421]

20 hours ago, bradleydavidgood said:

My bolt holes are 7.5" side to side and front to back are slots variable for about 5-10".

 

This is the most attractive seat I've found so far and has one bolt pattern that matches:

 

CountyLine 18.5 in. Kubota Tractor Seat

 

Another option, but no details on this one about bolt pattern options and if the seat comes apart to be able to drill new holes or relocate the rails.

 

GFYSHIP Universal Tractor Seat

 

Anyone replaced the seat with something they like that mounts well?

 

Thanks!

Your bolt holes should be 7.5"x 7.0"