C100 0 #1 Posted 3 hours ago Good Morning, I have a 1990 310-8. I normally keep the tractor in my garage, but to give me some space, I temporarily put it in my shed. This past week it was brutally hot, +100. Who knows how hot that shed was. I pulled the tractor out, and there was a puddle of fluid under the transmission. I put in some fluid in yesterday and this morning nothing on some cardboard. But, it looks like to the rear of the brake band is wet, but not dripping and could be something I hadn't noticed before. I read that the transaxle holds two quarts of 80W 140?? Thoughts? The equipment that is out there is not anywhere the quality of this tractor. My 37" deck is welded together, some rust; but I would like to keep it running. Looking for some experienced help. Fred Share this post Link to post Share on other sites
ri702bill 12,371 #2 Posted 45 minutes ago Fred - You can use that or 75X90W oil. Changing the brake shaft seal is rather simple and there is no need to split the Unidrive case to do so. Check that shaft for up & down or side to side play with the brake band & drum removed. IF there is play in either direction, the bearing inside needs to be replaced... much more work. A bit of in & out play is normal. Share this post Link to post Share on other sites
