65-42ms01 mower deck

[Bv1348 0]

I have a 42 mower deck that has oil seals underneath the mower deck pulley.

I am having a time trying to be get the oil seal replaced after replacing the worn bearing. All the diagrams show a different set of parts for the ms01.

Any idea where to get the new seal

[gwest_ca-(File Mod) 12,320]

Click on fuzzy picture in this link.

That will bring up a page that includes 2 pages on the spindle updates. Click on them to enlarge. You may have newer spindle assemblies.

If you need dimensions of seals I may be able to find them.

Shaft size is likely 3/4". What outside diameter do you need?

 

[Lee1977 7,671]

None of the parts drawings show a bottom seal on the 65 series. I had a 75 series dech and it doesn't show the seal either.  Wheel Horse may have decided it wasn't needed.

I change my 75 series deck to metric assenbles some time in the late 80's; 

[gwest_ca-(File Mod) 12,320]

Don't know if it will help but here is a list of all the decks

These decks all use blades with a 3/4" center hole.

1977 model 75-42MS02 replaced by (Do not have operator manual)

1978 model 85-42MS01 (Do not have operator manual)

1979 model 95-42MS00 (Do not have operator manual)

1979 model 95-42MS01 (Do not have operator manual)

1980 model 05-42MS01 (Have operator manual)

1981-1983 model 05-42MS02 (Have operator manual)

1984 model 05-42MS03 (Have operator manual) - Last year for bearings with 3/4" ID

1985 model 05-42MS04 (Do not have operator manual) - First year for bearings with 17mm ID unless older spindles were updated.

1986-1988 model 05-42MS05 (Have operator manual)

1989 model 15-42SC01 (Do not have operator manual)

1990 model 15-42SC02 (Have operator manual)

1990-1992 model 15-42SC03 (Have operator manual)

1993-2007 and 2009-2012 model 78345 (Have operator manuals)

These decks all use blades with a 3/4" center hole.

Note - 17mm is .669"