ebinmaine 79,300 #26 Posted Thursday at 11:44 PM Doubtful. Continued clashing WILL BE a problem. 1 1 Share this post Link to post Share on other sites
Handy Don 16,795 #27 Posted Friday at 12:26 AM 40 minutes ago, ebinmaine said: Doubtful. Continued clashing WILL BE a problem. Rare? Don’t worry. Regular? Bad 1 1 Share this post Link to post Share on other sites
FLtractor 184 #28 Posted Friday at 01:53 AM (edited) Are there any videos showing the splash transmission such as the 1960s wheelhorses… how they lubricate the gears. Also while I’m here on this durable thread I started.. what’s the best towing gear for 856?1st due to lowest=strongest.. slowest speed for safer? Edited Friday at 03:12 AM by FLtractor Share this post Link to post Share on other sites
ebinmaine 79,300 #29 Posted Friday at 08:37 AM 6 hours ago, FLtractor said: Are there any videos showing the splash transmission such as the 1960s wheelhorses… how they lubricate the gears. I've never seen a video but basically they roll the lower gears IN the oil and it spreads to the rest at a good speed. 6 hours ago, FLtractor said: Also while I’m here on this durable thread I started.. what’s the best towing gear for 856?1st due to lowest=strongest.. slowest speed for safer? Doesn't matter. Whatever speed is safe for conditions and keeps your engine speed above half throttle. Share this post Link to post Share on other sites
FLtractor 184 #30 Posted Friday at 10:25 AM 1 hour ago, ebinmaine said: I've never seen a video but basically they roll the lower gears IN the oil and it spreads to the rest at a good speed. Doesn't matter. Whatever speed is safe for conditions and keeps your engine speed above half throttle. Above half throttle to help keep the engine cool enough from over heating? 1 Share this post Link to post Share on other sites
ebinmaine 79,300 #31 Posted Friday at 04:59 PM 6 hours ago, FLtractor said: Above half throttle to help keep the engine cool enough from over heating? Yes. And oil splashing nicely. Share this post Link to post Share on other sites
adsm08 4,672 #32 Posted 20 hours ago On 6/25/2026 at 9:53 PM, FLtractor said: Are there any videos showing the splash transmission such as the 1960s wheelhorses… how they lubricate the gears. Here is one, skip ahead to around the 2-minute mark. It's obviously not a WH transaxle, but the physics is the same. Share this post Link to post Share on other sites
Handy Don 16,795 #33 Posted 12 hours ago 7 hours ago, adsm08 said: Here is one, skip ahead to around the 2-minute mark. Nice demo! A bit disingenuous, IMHO, because the speed is very slow and doesn’t show the effect of oil being flung off a spinning gear. Share this post Link to post Share on other sites
adsm08 4,672 #34 Posted 2 hours ago 10 hours ago, Handy Don said: Nice demo! A bit disingenuous, IMHO, because the speed is very slow and doesn’t show the effect of oil being flung off a spinning gear. True, but it at least gives a visible idea of the physics of the situation. It actually doesn't take much looking for find guys running those displays up to 5200 RPM with drills, but then it gets harder to see how the oil moves from gear to gear. Share this post Link to post Share on other sites
