Dillonrtx 0 #1 Posted June 14 Hi I’m new to site and new to wheel horse. I bought a raider 12 and I don’t know the year yet have to clean serial tag off previous owner painted over it. But I have a mower deck I am struggling to install and the belts. The previous owner bought tractor to plow snow but never used it so he was no help. He gave me a box of random parts I don’t know if I am missing parts or what I am doing wrong but can I please get some help thankyou. Share this post Link to post Share on other sites
Blaine 33 #2 Posted June 14 Is there a model number on the deck? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,283 #3 Posted June 14 Welcome to Red Square. This may be the wrong deck and vintage but may help. Click on the tractor in the link and go from there. Mower decks are sized by their width of cut - not the width of the deck. Keep the questions coming. Share this post Link to post Share on other sites
rjg854 13,102 #5 Posted Monday at 01:27 PM 2 @Dillonrtx I don't have a deck like that but you've come to the right place to get answers. Share this post Link to post Share on other sites
DLF 73 #6 Posted Monday at 04:17 PM (edited) There should be a flat 3" Idler on the back side of the piece laying on the ground. The belt goes down from the PTO around the V idler and back to the deck. It come back with the back side on the flat idler and up to the PTO. There should be a short flat bar with a welded pin that fit the end of the curved bar. not sure where it attaches.. I took one off my 1971 Raider five years ago. Edited Monday at 04:44 PM by DLF Share this post Link to post Share on other sites
AlexR 3,013 #7 Posted Monday at 04:40 PM (edited) This is the way my Raider 14 was setup when I got it. The circled blue area on your tractor is also a issue there should be a locking mechanism to hold that bar into the slot. It appears to be missing that. Edited Monday at 04:44 PM by AlexR 1 Share this post Link to post Share on other sites
Dillonrtx 0 #8 Posted 5 hours ago Thankyou everyone for the help I finally got it on. Only thing missing is part # 6704 pin which I have ordered thankyou all Share this post Link to post Share on other sites
