kthomas62 46 #1 Posted June 1 (edited) Hello all, Tired of holding my seat up with a bunji cord when putting gas in my 414-8, I finally decided to get a new seat strut. When I got my WH, there was no strut or hardware at all so, I am looking for these bolt sleeves / bushings or whatever they are called (photo for reference), or any ideas of what I could use or fab so the strut move freely. Thank you in advance! Kevin Edited June 1 by kthomas62 Share this post Link to post Share on other sites
953 nut 67,355 #2 Posted June 1 Should be able to take some measurements and find them in the Hillman Cabinets at ACE, Lowes, or Home Depot. 2 1 Share this post Link to post Share on other sites
Handy Don 16,927 #3 Posted June 2 59 minutes ago, kthomas62 said: bolt sleeves / bushings or whatever they are called They are called stepped bushings. Search based on the two ODs and the ID. I’d start with McMaster-Carr Share this post Link to post Share on other sites
kthomas62 46 #4 Posted June 2 1 minute ago, Handy Don said: They are called stepped bushings. Search based on the two ODs and the ID. I’d start with McMaster-Carr Thank you Share this post Link to post Share on other sites
