Easton Rich 1,219 #1 Posted 3 hours ago This is my current project, a 69' Raider 10. It has a HORRIBLE knock, but it runs smooth otherwise. I've got an Onan P220 that runs and functions perfectly. Our next option is a 14hp Kohler that also functions great. Should I rebuild the HH100 or swap it? Share this post Link to post Share on other sites
ebinmaine 78,774 #2 Posted 3 hours ago 2 minutes ago, Easton Rich said: 14hp Kohler That's the answer 1 Share this post Link to post Share on other sites
ri702bill 12,086 #3 Posted 3 hours ago IMHO... spending your resources - time & money - going thru a Tecumseh is akin to rearranging the deck chairs on the listing Titanic... Swap it with the Kohler. 2 Share this post Link to post Share on other sites
Easton Rich 1,219 #4 Posted 3 hours ago Looks like I got my answer! Consider it done, eventually..... Share this post Link to post Share on other sites
Handy Don 16,554 #5 Posted 2 hours ago Piling on... I am not a Tecumseh hater. There can be valid reasons to invest time and treasure to resuscitate one. However, if a low- or no-cost compatible Kohler is available to swap in, the swap wins. 2 Share this post Link to post Share on other sites
Easton Rich 1,219 #6 Posted 1 hour ago I've got another HH100 to rebuild also. These techys are really piling up! Share this post Link to post Share on other sites
953 nut 65,987 #7 Posted 1 hour ago 47 minutes ago, Easton Rich said: I've got another HH100 to rebuild also. These techys are really piling up! Dig a big enough hole to burry them so you don't trip over them. Share this post Link to post Share on other sites
