mas041 0 #1 Posted 13 hours ago I've been looking all over for just one deck spindle and side pulley after my spindle was bent or the bearing was shot. Either way, the actual spindle is damaged from removal. Pulley was rusted stuck so looking to replace that as well. I think its a 5-0621 deck but I'm not sure. The spindles don't quite line up with what I'm seeing online. Anybody got a spindle for this? Share this post Link to post Share on other sites
ineedanother 2,055 #2 Posted 12 hours ago I don't have a replacement for that but you should put an ad in the wanted section of the classifieds. I'm sure someone here has one. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,159 #3 Posted 12 hours ago Welcome to Red Square Mower spindle assemblies could be B, A1, G2 or Z For A1 see service bulletin 292B For G2 see service bulletin 292B Click on the fuzzy picture in the link to download the 35 page manual Share this post Link to post Share on other sites
BradKahler 296 #4 Posted 47 minutes ago I believe this is the same shaft you're looking for, it is 4-1/2" long. I received this from someone only to find out it was not a match for the shafts I was looking for. The bearings are frozen but the shaft looks to be in ok condition. You can have it for the cost of shipping if you think you can use it. Shipping would be from Richmond KY. Share this post Link to post Share on other sites
