Zagray - whatcha got?

[PWL216 1,181]

Zagray is May 2nd in CT. Here’s stuff I can bring to sell if anybody is interested…

- A project bronco 14 with original 14 hp engine. Project machine. $100
- running Kohler 14 hp with complete wiring harness. $100.

- 257 – H project machine, complete, with 42 inch mowing deck. $100.

- Wheel horse dump cart. $75.

- cub cadet 122. Complete, the seat, muffler and starter generator were taking off to protect it from the weather. The 122 is also protected from the weather. No creeper gear. Rear Tires are like brand new. $250

- mower decks. What do you need? I have a bunch of them.

- several mule drive. $25 each.

 

i’m looking forward to seeing the local wheel horse guys at the show!

Edited yesterday at 07:06 PM by PWL216

[wallfish 19,734]

6 hours ago, PWL216 said:

mower decks. What do you need?

Do you have a decent 60s style deck? Not as pretty as the pic! LOL

[PWL216 1,181]

36 minutes ago, wallfish said:

Do you have a decent 60s style deck? Not as pretty as the pic! LOL

Sorry, I don’t have decks that old…Hope to see you there.

[wallfish 19,734]

1 hour ago, PWL216 said:

Sorry, I don’t have decks that old…Hope to see you there.

Looking forward to it Paul

[Retired Wrencher 6,581]

Paul so you say the Bronco runs? Auto or a gear Jamer? I would like to look at it when down there. I will be on a 1257.

Edited 10 hours ago by Retired Wrencher

[squonk 46,099]

11 hours ago, wallfish said:

Do you have a decent 60s style deck? Not as pretty as the pic! LOL

John, is all you need is the part circled? I may be able to help you out at the show.

[PWL216 1,181]

21 minutes ago, Retired Wrencher said:

Paul so you say the Bronco runs? Auto or a gear Jamer? I would like to look at it when down there. I will be on a 1257.

The Bronco does not run but is complete, minus the seat. It is an auto with hydraulic lift. 

[Retired Wrencher 6,581]

Ok sorry I will pass. I am a gear Jammer. Good luck with the sale.

[Handy Don 16,272]

The original BF Goodrich Silvertown All Purpose 6-12’s on my 854 are on the verge of aging out so I’m on the lookout for replacements. These, and their Firestone cousins, look like the snow tires of yesteryear. I’m not interested in Ag bar-style. 

[wallfish 19,734]

6 hours ago, squonk said:

John, is all you need is the part circled? I may be able to help you out at the show.

For a different project YES. Just the rod and pulley section to fit into the mid tach. I have a wanted ad in the classified section which is where that pic came from. 

I was also thinking about a replacement deck but it's not completely necessary

[squonk 46,099]

10 minutes ago, wallfish said:

For a different project YES. Just the rod and pulley section to fit into the mid tach. I have a wanted ad in the classified section which is where that pic came from. 

I was also thinking about a replacement deck but it's not completely necessary

I may have what you need here. I will look tomorrow whilst it's not pouring out like it is now.  

 

I'm pretty sure I have at least the double pulley. I'm getting an older style deck from Sparky at the show and all I really wanted/need off of it are the blades. So if you need anything off of it it will be available. I also have a complete frame,crossshaft, double pulley and bearing stands that are in good shape I'll be bringing to get rid of that is in good shape.

[squonk 46,099]

@wallfish It stopped raining for a minute. Here's what I have. Plus the deck I'm getting from Sparky.  The triple drive pulley has new bearings in it. The gears and bearings in the bearing stands are good.

 

 

[wallfish 19,734]

14 minutes ago, squonk said:

 The triple drive pulley has new bearings in it.

That's the piece I'm looking for. If you want me to take the rest it will go into the "future project pile" to build something out of.

[squonk 46,099]

11 minutes ago, wallfish said:

That's the piece I'm looking for. If you want me to take the rest it will go into the "future project pile" to build something out of.

I'll have them with me.