pfrederi 20,245 #1 Posted 2 hours ago Bought tubes for the Lawn Ranger fronts. The came with patches.... also 2 plastic tools??? Anyone know what the are for exactly...I have lots of tire tools nothing like these two things... 1 Share this post Link to post Share on other sites
rjg854 12,941 #2 Posted 2 hours ago They sent patches with new tubes, makes one wonder 1 1 Share this post Link to post Share on other sites
ebinmaine 78,218 #3 Posted 2 hours ago Can't say for sure but those look quite a lot like bicycle tire tube installation tools I've seen in the past 2 Share this post Link to post Share on other sites
ri702bill 11,798 #4 Posted 1 hour ago Paul - do yourself a favor to avoid frustration. Inflate the tubes to about 5 PSI a few days before you plan to install them. I lay each on a hard flat surface, put either a stout pice of cardboard or plywood on top. And a brick on top of that... Take a tape measure to get a dimension from the top of the board to the hard surface below. Let it sit 2 days and remeasure. Verify they hold air.... 1 Share this post Link to post Share on other sites
