tgranthamfd 28 #1 Posted October 3, 2009 Just wondering if the Stens wheel weights, that you fill with sand etc.., are any good? Are they worth the money? Thanks in advance. Share this post Link to post Share on other sites
JimD 3,345 #2 Posted October 3, 2009 i've seen a lot of threads on this subject on several forum, and all those who have them, say they are fine. some are filled with concrete, some with sand. at any rate, the users seem to like them. i wish i had some myself. :scratchead: Share this post Link to post Share on other sites
tgranthamfd 28 #3 Posted October 3, 2009 Cool, Thanks. I just read another post, they had a link to another company, same basic wieght but about half of the cost of the Stens I was looking at. Share this post Link to post Share on other sites
Kelly 1,028 #4 Posted October 4, 2009 Myself I would use cement to fill them, i know most of you have seen the ones with that hole in the plastic, if filled with sand it will run out, on the other hand I seen a set on a tractor that they cut all the plastic off just the cement left and painted it still had the shape of the plastic, can't do that with sand. Share this post Link to post Share on other sites