Jump to content
Bill D

How Do I Stop Eaton Burps

By Bill D, in Transmissions and transaxles

Recommended Posts

Bill D    2,678

Bill D
Posted

How can I stop this?  Never did it last year.  This year it won't stop.  Second time this spring.   My other 416H doesn't do it.   Thanks. 

20260404_084228.jpg

  • Confused 1

Share this post

Link to post
Share on other sites
 

ebinmaine    77,862

ebinmaine
Posted

Your transmission level indicator is clogged. Get a piece of really small mechanics wire and run it up through the curved part at the top. Then spray some brake clean up through it.

  • Like 2

Share this post

Link to post
Share on other sites
 

squonk    45,817

squonk
Posted

:text-yeahthat:The vent hole is in the handle of the dipstick 

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • Bill D
      Hydro Linkage Travel Issue
      By Bill D
      My 199X 416H can't reach top speed.  The cam plate hits the arm where it attaches to the transmission as shown in photo #1.  Does anyone know why this happens on some tractors and not others?  Is there a way to fix it without grinding something down?
       
      Photo #2 shows my 1994 416H which has full linkage travel and can reach top speed.  I don't see an obvious difference between the two.
       
      Thanks for the help as always.


    • Bill D
      Hydro Pedal #1
      By Bill D
      I wanted a pedal control for my recently acquired GT1800.  This is what I came up with.  It still needs some finishing and I may rework the foot pedal.  It's basically bolt on other than drilling a 7/8" hole in the belt cover.  I'm also considering building an automatic neutral return if I can find the right torsion spring.  I would appreciate any input and advice.



    • Bill D
      Hydro Hose Change
      By Bill D
      Can I change the hoses on my GT1800 without draining the transmission?  Thanks. 
    • Bill D
      Drive belt length.
      By Bill D
      I have a GT1800 that I have swapped an M14 into.  The original drive belt is too long for the Kohler.  I tried a 7473 belt and that was too long.  I'm guessing I need an 81" belt.  Does anyone know for sure?  I'm thinking it should be the same length as a 314H?   I'm trying to avoid multiple trips to TSC with the price of gas.  Yes, I do have the correct hydro pulley on the Kohler.  Thanks.
    • Bill D
      Hydro lockup. Problem?
      By Bill D
      I've got an Eaton 1100 in a GT 1800.  I noticed that it pushes quite easily after it had been sitting and not running for awhile.  The manual says the transmission should lock up when pushed, but this one doesn't.  I've had it running and it does move okay.  It will lock up if you try to push it right after you shut it off?  It hasn't been running in a month, and now it pushes easily.  Is this normal or do I have a problem? 
×
×
  • Create New...