Jump to content
ROK2024

97 Kohler CV18S What's that Sound? Ringing

Recommended Posts

ROK2024

Hi all, 

Hope maybe someone will take a listen and recognize this sound.

I first heard this ringing late last fall on the last couple of mows as I went to put it in the shed.

Seems loudest around the muffler.

 

I was able to record the ring and posted in online here.. (no sign-in needed but let me know if it doesn't work for you)  Here's the link.

  https://jumpshare.com/s/DPVlFyns8sqZdEQXOKAl

 

The engine runs well and I only hear the ring briefly at idle and usually a quiet ting. When running it sounds normal to my ear. Compression is 175 lbs in the left cylinder and 160 in the right.

 

I bought it in 2009 w 340 hrs, as far as I know the engine hasn't had any work done except for minor maint (air filter, oil change & filter)..

Wheel Horse 267 A Model 72085, sn# 7900388 (1997).. 929 hrs

Kohler 18 CV18S    Spec 61528 Serial No. 2631409677    Family SKH624U1G2R

 

Not having been intimate with small engine internals my guess would be  to look at a valve or hydraulic lifter, maybe a crank push-rod  cap? 

Thanks,

Jay in MD

Edited by ROK2024
Add sound location

Share this post


Link to post
Share on other sites
 
JoeM

At first it sounds like a muffler ting. 

Might have to do the old screwdriver to the ear trick to pin point. 

  • Excellent 1

Share this post


Link to post
Share on other sites
 
gwest_ca

Can you run it without the muffler? You may have a loose baffle inside it.

See if you can duplicate the noise by tapping the muffler with a rubber mallet.

  • Like 1

Share this post


Link to post
Share on other sites
 
ROK2024

Hi GWest & JoeM.. BINGO.. the Muffler sounds solid with the Tap test, but when tapping I bumped the Muffler Shield and Ting there it was.. so Kudo's to Joe for a good ear calling the muffler Ting. 

With the engine not running with just a very light tap on the shield rings the pipe like a little bell.

Oh, I'm so happy.. ;-} Thanks a lot. goes to prove three heads are better than one.

Here are pics of the shield and contact point.

 

 

IMG_20260330_170149_Muffler_Shield_Ting.jpg

IMG_20260330_172353_Front_View.jpg

  • Like 5

Share this post


Link to post
Share on other sites
 
Handy Don
19 hours ago, ROK2024 said:

goes to prove three heads are better than one

Although it surely depends on which three heads!

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...