417-A followed me home today.

[TonyToro Jr. 2,388]

Well oops I did it again! 

Picked this up today. Runs ok at about half choke but is clearing up so may just be bad fuel. But a carb cleaning will still come. This is the only picture you get today. More to come tommorow.

[c-series don 11,661]

Way to tease us Tony!!

[JERSEYHAWG / Glenn 4,532]

Good tease shot. 😅

[T-Mo-(Moderator) 4,769]

9 hours ago, TonyToro Jr. said:

Well oops I did it again! 

Picked this up today. Runs ok at about half choke but is clearing up so may just be bad fuel. But a carb cleaning will still come. This is the only picture you get today. More to come tommorow.

 

That would have been a good addition to this thread:  

 

[TonyToro Jr. 2,388]

Here it is!

It’s a little rough in some spots. So some spots will get repainted. It runs ok on half choke so a carb cleaning and drain the old gas is coming for this. The previous owner said this engine was replaced? I’m not familiar with these engines so maybe someone else will chime in on that. There’s 1488 on the hour meter but haven’t ran it enough to see if that works. The hydro needs an adjustment as the lever is really loose. The deck has some

patches but I do have a 48” that I can put on this.

 

[pfrederi 20,050]

KT17 Series are a good engine.  The engine data is on the small plate I circled.  Clean it carefully the number rub off easily.  With spec and serial number we can see if it is newer.

Edited 1 hour ago by pfrederi

[sqrlgtr 2,301]

@TonyToro Jr.

About time you posted more pics beginning to think the first ones were AI generated.

[TonyToro Jr. 2,388]

Here’s that tag-

[TonyToro Jr. 2,388]

And if I remember correctly is there supposed to be a chrome cover here??