TonyToro Jr. 2,390 #1 Posted 23 hours ago Well oops I did it again! Picked this up today. Runs ok at about half choke but is clearing up so may just be bad fuel. But a carb cleaning will still come. This is the only picture you get today. More to come tommorow. 9 3 Share this post Link to post Share on other sites
c-series don 11,661 #2 Posted 22 hours ago Way to tease us Tony!! 1 1 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,532 #3 Posted 19 hours ago Good tease shot. 😅 1 Share this post Link to post Share on other sites
T-Mo-(Moderator) 4,769 #4 Posted 14 hours ago 9 hours ago, TonyToro Jr. said: Well oops I did it again! Picked this up today. Runs ok at about half choke but is clearing up so may just be bad fuel. But a carb cleaning will still come. This is the only picture you get today. More to come tommorow. That would have been a good addition to this thread: 1 Share this post Link to post Share on other sites
TonyToro Jr. 2,390 #5 Posted 3 hours ago Here it is! It’s a little rough in some spots. So some spots will get repainted. It runs ok on half choke so a carb cleaning and drain the old gas is coming for this. The previous owner said this engine was replaced? I’m not familiar with these engines so maybe someone else will chime in on that. There’s 1488 on the hour meter but haven’t ran it enough to see if that works. The hydro needs an adjustment as the lever is really loose. The deck has some patches but I do have a 48” that I can put on this. 1 2 Share this post Link to post Share on other sites
pfrederi 20,051 #6 Posted 3 hours ago (edited) KT17 Series are a good engine. The engine data is on the small plate I circled. Clean it carefully the number rub off easily. With spec and serial number we can see if it is newer. Edited 3 hours ago by pfrederi 1 2 Share this post Link to post Share on other sites
sqrlgtr 2,301 #7 Posted 2 hours ago @TonyToro Jr. About time you posted more pics beginning to think the first ones were AI generated. 1 Share this post Link to post Share on other sites
TonyToro Jr. 2,390 #8 Posted 2 hours ago Here’s that tag- 1 Share this post Link to post Share on other sites
TonyToro Jr. 2,390 #9 Posted 2 hours ago And if I remember correctly is there supposed to be a chrome cover here?? 1 Share this post Link to post Share on other sites
JCM 10,960 #10 Posted 1 hour ago (edited) Muffler should be chrome on a 417. And a chrome cover on a 418. The muffler exit can be either straight out the middle on the 417 or out the front end. Yours may have been chrome when new. Looks like a 1985. A true BEAST either way. Terry Dennis can make a new engine I.D. sticker for you. Edited 1 hour ago by JCM Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,063 #11 Posted 18 minutes ago Kohler made serial 14235814 in 1984 so if original to the tractor it would be a 1985 model 31-17KE01. Share this post Link to post Share on other sites
