2026 Big Show Buy/Sell/Trade Thread

[702854boy 841]

@BlaineUpdate: The push rod I have is 1 1/2 inches long. If that will work for you you can have all of the stuff in the picture. If the push rod won't work you can still have everything else if you want it.

Edited 17 hours ago by 702854boy

[Blaine 64]

10 minutes ago, 702854boy said:

@BlaineDo you know how long of a push rod you need?

 I believe the small block is shorter than the big block push rod, i know the points are the same, and i’m only assuming the covers are the same also, but we’ll find out. Thank you. 

Original Kohler Part Number: 47 411 04-S (often replacing earlier 47 411 01-S or 47 411 01versions)

0.184 " in diameter and 1.550 " in length according to AI search

[702854boy 841]

According to my tape measure they measure the length you stated above, you can have them and see if they'll work if you'd like. Don't want anyone having to go home with a dead horse, thats happened to us before and its not very fun.

Edited 16 hours ago by 702854boy

[Blaine 64]

I’m seeing closer to 1.250” on your tape measure… about 1/4” short. 

[702854boy 841]

Yeah, I realized that after the fact that I apparently can't read a tape measure tonight. We do have a 14 horse that if i can get the push rod out of you can still have all of the stuff. Update, the push rod is not wanting to come out of the 14 horse but you can still have the points, condenser, and cover, and gasket, and screws to help narrow down your search.

Edited 16 hours ago by 702854boy

[Blaine 64]

14 minutes ago, 702854boy said:

the push rod is not wanting to come out of the 14 horse

Is it rusted in place?

[702854boy 841]

Yeah

[squonk 47,002]

@Blaine I will dig through my big block parts. Maybe I'll have that rod. 

[953 nut 66,820]

8 hours ago, Blaine said:

I may have a correct ignition switch to do the points ignition conversion

That would be a 103990 ignition switch. This drawing will give you a start in the right direction. This is presuming you have a starter as opposed to a Starter / Generator. If you have a S/G we have a drawing for that too.

[stevebo-(Moderator) 8,688]

If anyone has a nice, original 1045 deck like this one shown (square style) I would be interested so long as price is fair.
Thanks! 

[Blaine 64]

13 minutes ago, 953 nut said:

That would be a 103990 ignition switch. This drawing will give you a start in the right direction. This is presuming you have a starter as opposed to a Starter / Generator. If you have a S/G we have a drawing for that too.

Yes, it has the starter. Bushings in it were dry, so i cleaned things up in there and lubed it. Brushes are looking pretty short but it sounds like it’ll work for now. I’ll have to see if my switch is a 103990, but i don’t think so…i don’t think it has that many terminals. 
 

 Things might pan out to be mowing with Whitey this weekend if i can find the 6908 drive pulley, a 1563 belt, and a side PTO in Ed’s buckets. 

 

[953 nut 66,820]

4 minutes ago, Blaine said:

I’ll have to see if my switch is a 103990, but i don’t think so

Having been a breakerless ignition system on a '70s tractor it wouldn't have the five terminal more modern ignition switch. While at the show you can look for the 103990 switch and a "Pigtail" for it.

[squonk 47,002]

30 minutes ago, Blaine said:

 

 Things might pan out to be mowing with Whitey this weekend if i can find the 6908 drive pulley, a 1563 belt, and a side PTO in Ed’s buckets. 

 

Belt is a 4L390   1/2" X 39"

[WHX?? 57,020]

@Blaine @Achto and I used to shop here https://www.psep.biz/ and they had all the stuff for what you are looking for including the push rod. Haven't shopped there in awhile but was a good source for stuff. 

Edited 6 hours ago by WHX??

[Blaine 64]

6 minutes ago, WHX?? said:

@Blaine @Achto and I used to shop here https://www.psep.biz/ and they had all the stuff for what you are looking for including the push rod. Haven't shopped there in awhile but was a good source for stuff. 

Bookmarked. Thank you. 

[Pullstart 70,171]

On 4/13/2026 at 2:23 PM, Pullstart said:

I have some left over shirts from plow day.  
 

4 size XL, 5 size L at the moment.

 

$20 each.

 

 

I have 3 Large and 4 X-L shirts packed.  Any takers?

[Blaine 64]

1 hour ago, 953 nut said:

Having been a breakerless ignition system on a '70s tractor it wouldn't have the five terminal more modern ignition switch. While at the show you can look for the 103990 switch and a "Pigtail" for it.

Sorry, i was referring to another switch i have, maybe from my long gone 867. It’s a 3 terminal that doesn’t use a starter relay. I’m not too concerned about a switch as i can work with what i’ve got. I could just add a hidden toggle switch to power the coil. Kinda like an anti-theft device. Lol

 

while looking for the switch i found a side PTO, but it’s not slotted, no hole for the latch, and missing the pulley, so it could be made to work, but i’ll still need a latch also. 
 

 

[JoeM 10,040]

I got a room at the Quality Inn not going to be used if anyone is interested, make an offer! 

It was prepaid none refundable, Thursday Night and Friday Night 

PM if interested. 

[Bow_Extreme 583]

On 6/20/2026 at 7:42 PM, c-series don said:

Wheel weights, fit C-195 and some D-Series $200 

 

PM Sent.  Thank You!

[WildHorses 440]

On 6/21/2026 at 11:51 AM, WHX?? said:

I'll call dibs for my bird farmer shipmate Dan @Dan 312-8 if he wants it.

He want it? I haven't seen any further responses.

[Joshyg 36]

11 hours ago, Blaine said:

 I believe the small block is shorter than the big block push rod, i know the points are the same, and i’m only assuming the covers are the same also, but we’ll find out. Thank you. 

Original Kohler Part Number: 47 411 04-S (often replacing earlier 47 411 01-S or 47 411 01versions)

0.184 " in diameter and 1.550 " in length according to AI search

                                   I believe i have the size you need

[Blaine 64]

9 minutes ago, Joshyg said:

 I believe i have the size you need

Perfect. Thank you. This being my first show and not knowing any names or faces, if ya’ll keep an eye out for me on Thursday, i’d greatly appreciate it. I’ll be the old bald guy with a ponytail in the Bahama Blue 54 F100. I’ll be wearing my matching “show shirt”. 

 

 

[squonk 47,002]

@Blaine I do not have that push rod 

[Joshyg 36]

26 minutes ago, Blaine said:

Perfect. Thank you. This being my first show and not knowing any names or faces, if ya’ll keep an eye out for me on Thursday, i’d greatly appreciate it. I’ll be the old bald guy with a ponytail in the Bahama Blue 54 F100. I’ll be wearing my matching “show shirt”. 

 

 

Ok I’ll bring it to the show and keep an eye out for you 

[Blaine 64]

Thanks. I’m looking forward to meeting everyone and putting some names and faces together. And thanks to the site admin and the WHCC for making all of this possible. And Mr Pond of course. Such a great community.