2026 Big Show Buy/Sell/Trade Thread

[702854boy 833]

@BlaineUpdate: The push rod I have is 1 1/2 inches long. If that will work for you you can have all of the stuff in the picture. If the push rod won't work you can still have everything else if you want it.

Edited 3 hours ago by 702854boy

[Blaine 59]

10 minutes ago, 702854boy said:

@BlaineDo you know how long of a push rod you need?

 I believe the small block is shorter than the big block push rod, i know the points are the same, and i’m only assuming the covers are the same also, but we’ll find out. Thank you. 

Original Kohler Part Number: 47 411 04-S (often replacing earlier 47 411 01-S or 47 411 01versions)

0.184 " in diameter and 1.550 " in length according to AI search

[702854boy 833]

According to my tape measure they measure the length you stated above, you can have them and see if they'll work if you'd like. Don't want anyone having to go home with a dead horse, thats happened to us before and its not very fun.

Edited 3 hours ago by 702854boy

[Blaine 59]

I’m seeing closer to 1.250” on your tape measure… about 1/4” short. 

[702854boy 833]

Yeah, I realized that after the fact that I apparently can't read a tape measure tonight. We do have a 14 horse that if i can get the push rod out of you can still have all of the stuff. Update, the push rod is not wanting to come out of the 14 horse but you can still have the points, condenser, and cover, and gasket, and screws to help narrow down your search.

Edited 3 hours ago by 702854boy

[Blaine 59]

14 minutes ago, 702854boy said:

the push rod is not wanting to come out of the 14 horse

Is it rusted in place?

[702854boy 833]

Yeah