702854boy 779 #126 Posted May 20 1 hour ago, Mike'sHorseBarn said: I have a dash, dash plate and hood, I'll have to see if I have an extra tank. How much would you want for all of it? Share this post Link to post Share on other sites
Mike'sHorseBarn 3,531 #127 Posted May 20 8 minutes ago, 702854boy said: How much would you want for all of it? I'll shoot you a PM. Share this post Link to post Share on other sites
squonk 46,567 #128 Posted Saturday at 09:06 PM Looking for a 1976 sales brochure Share this post Link to post Share on other sites
702854boy 779 #129 Posted Saturday at 09:47 PM I know this is probably a long shot but would anyone have a set of 6-12 diamond treads that they don't want an arm and a leg for? Share this post Link to post Share on other sites
fast88pu 3,375 #130 Posted Saturday at 10:58 PM 1 hour ago, 702854boy said: I know this is probably a long shot but would anyone have a set of 6-12 diamond treads that they don't want an arm and a leg for? What's an arm and leg considered ? 1 Share this post Link to post Share on other sites
Handy Don 16,606 #131 Posted Saturday at 11:20 PM 21 minutes ago, fast88pu said: What's an arm and leg considered ? Excellent comeback! 1 Share this post Link to post Share on other sites
adsm08 4,472 #132 Posted Saturday at 11:22 PM 23 minutes ago, fast88pu said: What's an arm and leg considered ? 2 Share this post Link to post Share on other sites
702854boy 779 #133 Posted Saturday at 11:25 PM 26 minutes ago, fast88pu said: What's an arm and leg considered ? I guess less than what two would cost new, which is 400 bucks or so Share this post Link to post Share on other sites
fast88pu 3,375 #134 Posted Saturday at 11:43 PM 17 minutes ago, 702854boy said: I guess less than what two would cost new, which is 400 bucks or so I got a set, only a leg. $350 Share this post Link to post Share on other sites
702854boy 779 #135 Posted Sunday at 12:51 AM Unfortunately, that's still a little out of my price range Share this post Link to post Share on other sites
whtractors24 3,467 #136 Posted Sunday at 01:16 PM (edited) Rj roller that came out of Mike Martino’s collection. Many years ago. This is nice example that can be displayed behind an rj-35 . The original ad is for example . I’ve only ever seen one other that is in a collection in Georgia . $575 can be brought to PA show . (860) 681-3610 Edited Sunday at 01:20 PM by whtractors24 Share this post Link to post Share on other sites
whtractors24 3,467 #137 Posted Sunday at 01:18 PM Rj-35 original hood weight with original hardware . This is not a reproduction. $450 can be brought to show (860) 681-3610 1 Share this post Link to post Share on other sites
Sparky-(Admin) 25,295 #138 Posted Monday at 08:22 PM My for sale stuff (just two items this year) was posted and claimed. Now, what am I looking to possibly buy? > Complete running driving C-81 (the one I recently bought is a dud) > K-181 for the C-81 I currently have if I don’t find a complete C-81. Could be cradle mount or solid frame mount. > Short Frame Square hood with an 8hp Kohler start gen and a manual trans. I like the 8’s best but would also consider a K-241 start gen machine. The C-81 or the short frame square I would prefer to be original paint or patina. Not into the show quality paint jobs. Thanks! 2 Share this post Link to post Share on other sites
fast88pu 3,375 #139 Posted yesterday at 12:49 AM (edited) Wheel horse 314-8, earlier k series machine. Runs good, no deck, plow or mule drive could use a new battery. $500 obo pm or text Kyle 845 591 7317 Edited 1 hour ago by fast88pu Share this post Link to post Share on other sites
WHX?? 56,598 #140 Posted 12 hours ago 15 hours ago, Sparky said: Short Frame Square hood with an 8hp Kohler start gen and a manual trans. I like the 8’s best but would also consider a K-241 start gen machine. I have a couple Mike ... PM sent. 1 Share this post Link to post Share on other sites
702854boy 779 #141 Posted 5 hours ago Would anyone have a short pan from a k241? Share this post Link to post Share on other sites
fast88pu 3,375 #142 Posted 5 hours ago 5 minutes ago, 702854boy said: Would anyone have a short pan from a k241? I have a complete k241 from a shaker plate Share this post Link to post Share on other sites
JoeM 9,934 #143 Posted 5 hours ago 9 minutes ago, 702854boy said: have a short pan from a k241 I might have an aluminum one have to look tomorrow. Share this post Link to post Share on other sites
702854boy 779 #144 Posted 5 hours ago 1 minute ago, JoeM said: I might have an aluminum one have to look tomorrow. Okay, even though its aluminum it would still be the shorter style like what the 1045s and 1055s used right? Share this post Link to post Share on other sites
JoeM 9,934 #145 Posted 4 hours ago 13 minutes ago, 702854boy said: style like what the 1045s and 1055s used right? I am thinking it has a bump in the middle that will sit in the frame. I got to look for it I think I know where it is, Share this post Link to post Share on other sites
Achto 31,814 #146 Posted 1 hour ago Looking for an 867 that has the number 5309 in the serial number. 4 Share this post Link to post Share on other sites
sqrlgtr 2,928 #147 Posted 1 hour ago 3 minutes ago, Achto said: Looking for an 867 that has the number 5309 in the serial number. let me check I might have 3 of them...... but I may not. 2 Share this post Link to post Share on other sites
702854boy 779 #148 Posted 1 hour ago 7 minutes ago, Achto said: Looking for an 867 that has the number 5309 in the serial number. Maybe Stacy's mom or Jessie's girl has one 3 Share this post Link to post Share on other sites
fast88pu 3,375 #149 Posted 1 hour ago (edited) Parts 4 speed rear. Pinion broken $20 pm or text 845 591 7317 Edited 1 hour ago by fast88pu Share this post Link to post Share on other sites
953 nut 66,097 #150 Posted 1 hour ago 13 minutes ago, 702854boy said: Maybe Stacy's mom or Jessie's girl has one Nice try, Jenny, don't change your number. 1 Share this post Link to post Share on other sites
