Tgalo 125 #1 Posted yesterday at 01:41 PM I bet this is already somewhere on the forum, but I can't find it. Anybody have a part number for a rear axle seal for a 520? The Toro seal is 22 bucks. Thanks, T Share this post Link to post Share on other sites
rmaynard 16,869 #2 Posted yesterday at 02:18 PM Hydro or 8-Speed? Share this post Link to post Share on other sites
Tgalo 125 #3 Posted yesterday at 02:24 PM Apologies, hydra Matic Share this post Link to post Share on other sites
rmaynard 16,869 #4 Posted yesterday at 02:27 PM (edited) 6449 (OEM) or 11124 aftermarket. Search Amazon or local NAPA store Edited yesterday at 02:28 PM by rmaynard 2 Share this post Link to post Share on other sites
Tgalo 125 #5 Posted 23 hours ago Awesome, thank you very much Share this post Link to post Share on other sites
lynnmor 8,629 #6 Posted 23 hours ago I have been using the pair of $14.54 6449 seals for Wheel Horse on eBay for years with no issue. Share this post Link to post Share on other sites
Tgalo 125 #7 Posted 21 hours ago Let me ask, if I have a axle bearing problem, are parts available for these things? I have been building transmissions for over 40 years so I'm sure I can do this if I can get parts. Thanks,T Share this post Link to post Share on other sites
pfrederi 19,900 #8 Posted 21 hours ago (edited) Outer needle bearings are B-1816 Inner is a 40x68x15mm SKF 6008-C3 Edited 21 hours ago by pfrederi Share this post Link to post Share on other sites
Easton Rich 982 #9 Posted 20 hours ago Ive got a complete seal kit somewhere for one, I'll try to find them if you're interested Share this post Link to post Share on other sites
ri702bill 11,262 #10 Posted 20 hours ago Getting the hub off first may be easier having the gear oil migrate along under the hub over time... or, it may be a showstopper.... Share this post Link to post Share on other sites
Tgalo 125 #11 Posted 20 hours ago Well, the hub slid right off thanks to the leak. It does have some radial play but how much is normal? Seems a bit much to me. The oil seems clean and I don't hear any noise when I rotate the wheel, its smooth. Going to put a seal in and see what happens. If it still leaks, I know I can get the bearings. Thank you pfrederi for those numbers, I'm going to order two of each as I have a bad feeling. T Share this post Link to post Share on other sites
pfrederi 19,900 #12 Posted 20 hours ago Axle move in and out about 1/8" OK Axle move up down back forward at all bad news... 3 Share this post Link to post Share on other sites
Ed Kennell 44,904 #13 Posted 20 hours ago 8 minutes ago, Tgalo said: It does have some radial play but how much is normal? If you can feel radial movement, the bearings probably are going to fail. Best to replace before a ball ends up in the tranny. 3 Share this post Link to post Share on other sites
Tgalo 125 #14 Posted 19 hours ago Yup, I agree, thanks again 1 Share this post Link to post Share on other sites
JoeM 9,622 #15 Posted 15 hours ago 1 1/8 axle with a new bearing will have .002 to .003 play 1 Share this post Link to post Share on other sites
Tgalo 125 #16 Posted 5 hours ago Well, were going to find out. I pulled the transaxle off the tractor last night and will bring it into work and go through it. Definitely had more than .003 of radial play. Want to power wash it before I disassemble it. 2 Share this post Link to post Share on other sites
