C160 Lift Cylindar/Hose Leak

[Joker72 79]

Any idea of whats failing to cause this 

leakage?

Edited 7 hours ago by Joker72

[pfrederi 19,807]

Lots of build up there.  Can't say where its from, need to clean it up and watch.  Most likely candidate is the swivel fitting .  Either the O ring had failed or the swivel itself is leaking.

[AlexR 2,494]

If it's the cylinder itself leaking you will probably have to send it to wheelhorse parts and more as the cap is welded on. 

[lynnmor 8,581]

Kinda hard to see.

[peter lena 9,731]

@Joker72   ever thought about a re route ?  have any truck stops near you ?  reroute to  eliminate  stress . pulling / chafing , those truck  stops have a light maintenance  shop , with  hose make up  , equipment , benders . letting you  hard  pipe most of the , bends / stress areas . then , hydraulic coupling connection  for  stress free hose set up .  thats a regular repair for them , tell them  your issue . just an idea , pete   

[peter lena 9,731]

@Joker72  https://www.google.com/search?q=camp+hill+pa+truck+stop+maint+shop&rlz=1C1CHBF_enUS866US866&oq=camp+hill+pa++truck+stop+maint+shop+&gs_lcrp=EgZrlimm=17785486341391092678  just did a quick  look up , your  related  service areas , pete