JimSraj 561 #1 Posted 16 hours ago Does anyone have any experience with the NAPA replacement ignition switch for the 111215 original. Looks like the only difference is the mounting shaft is 9/16” rather than 5/8” on the original. Both seem to be 5 pin plus ground. Thanks. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,949 #2 Posted 2 hours ago 111215 has been replaced by 103991 Both use 101884 nut so stem diameter should be the same. Share this post Link to post Share on other sites
