Sparky-(Admin) 24,260 #1 Posted 13 hours ago My new C-145 Auto came with a real nice seat. It’s new or like new, made of rubber and not vinyl so it’s still flexible in the cold. Would love to find another, but can’t figure out who made it. The only clue is the word PERSONS in the rubber (see picture). It even has the correct bolt pattern for our tractors!!! Anyone know who made it? Or does anyone have the same seat that might have a brand name sticker under it. 2 Share this post Link to post Share on other sites
ebinmaine 76,566 #2 Posted 13 hours ago Looks like there were Huffy bicycle seats made by Persons. Don't see any specific tractor seats. 1 Share this post Link to post Share on other sites
Bill D 2,512 #3 Posted 13 hours ago TSC used to sell those. Not sure if they still do. 1 Share this post Link to post Share on other sites
Handy Don 15,656 #4 Posted 13 hours ago Just now, Bill D said: TSC used to sell those. Not sure if they still do. We got one a couple of years back for the camp tractor and then my sone decided to swap with the one on his 312-H--claims he’ll get more use out of it. A huge advantage for us was that the rubber cover was easily removed/reinstalled when installing & wiring the rear-facing work light attached to the upper part of the steel seat back. 1 Share this post Link to post Share on other sites
Sparky-(Admin) 24,260 #5 Posted 12 hours ago 20 minutes ago, ebinmaine said: Looks like there were Huffy bicycle seats made by Persons. Don't see any specific tractor seats. I did find some info on bike seats as well, but nothing about tractor seats. 1 Share this post Link to post Share on other sites
76c12091520h 4,008 #6 Posted 12 hours ago Sold one just like that at the show last year; it came out of the recycling yard at work. It came off of a Wal-Mart jazzy scooter, had the correct 7 x 7.5 bolt pattern. 1 1 Share this post Link to post Share on other sites
Sparky-(Admin) 24,260 #7 Posted 11 hours ago 49 minutes ago, 76c12091520h said: Sold one just like that at the show last year; it came out of the recycling yard at work. It came off of a Wal-Mart jazzy scooter, had the correct 7 x 7.5 bolt pattern. Interesting, bought this tractor off a guy in Pa that mentioned he goes to the show , could it be I have the seat that you sold?? Share this post Link to post Share on other sites
Easton Rich 803 #8 Posted 11 hours ago I've got one, but mines on my C-141. They are super thick. I'll be following along to see if we find an answer because I was wondering. 1 Share this post Link to post Share on other sites
oliver2-44 11,137 #9 Posted 8 hours ago I’ve gotten 2 of them from the scrap tractors at a local mower shop Share this post Link to post Share on other sites
JoeM 9,395 #10 Posted 2 hours ago agri supply has very similar seats, with that rubber style cover https://www.agrisupply.com/search.aspx?ss=seat 1 Share this post Link to post Share on other sites
Sparky-(Admin) 24,260 #11 Posted 2 hours ago 10 minutes ago, JoeM said: agri supply has very similar seats, with that rubber style cover https://www.agrisupply.com/search.aspx?ss=seat Good price AND the correct mounting holes for our WH’s! I have one of these seats as well on my GT-1600. A little thin on the padding but it sure wears well and stays flexible in the cold. Share this post Link to post Share on other sites
JoeM 9,395 #12 Posted 2 hours ago I tried to match one up for the jeep project and came up dry. Ended up with a set of the ones shown from agrisupply. I think there are runs made at times then changed and discontinued. Discontinued seat. 1 1 Share this post Link to post Share on other sites
