WHX?? 54,256 #26 Posted 14 hours ago 2 hours ago, JerryLook said: get away with 1 1/2” length bolts? Should be ok I use 1 1/4. Depends on if you went with spacers and what they would take. My pics above are 114 with a thick washer under the head. Share this post Link to post Share on other sites
Roger R 471 #27 Posted 10 hours ago 5 hours ago, JerryLook said: I’m having issues finding 7/16-20 bolts that are threaded to the head (no shoulder) in lengths longer than 1 1/2”. McMaster Carr will have them. They have any bolt configuration you can imagine Share this post Link to post Share on other sites
pfrederi 19,694 #28 Posted 9 hours ago 52 minutes ago, Roger R said: McMaster Carr will have them. They have any bolt configuration you can imagine Well they do but the price after 1.5" Ouch Share this post Link to post Share on other sites
Tonytoro416 1,300 #29 Posted 2 hours ago I have 3/4” spacers on my 416h and actually did wheel studs and also drilled and tapped the hubs and spacers so the spacers bolt to the hub and I don’t have to fight either trying to keep the spacers lined up perfectly while mounting the tire. My tires are loaded so was a pain to try and do all at once Share this post Link to post Share on other sites
