Boyd Walker 2 #1 Posted December 8 The engine is a Kohler CH22s and it’s running rich, time to replace the carburetor. Local Toro dealer if I recall correctly quoted me around $150 for a new carburetor. Not available on the Toro or partstree sites. I looked on eBay and I think I’m seeing a bunch of aftermarket made across the ocean. I’m terrible with carburetors so I’m not going to rebuild mine. Anyone have the part number for one? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,840 #2 Posted December 8 What is the spec number on the engine? Share this post Link to post Share on other sites
JoeM 9,305 #3 Posted December 8 @Boyd Walker, I'm putting this one on a 522xi today, Looks pretty good out of the box, I will let you know how it goes. 1 Share this post Link to post Share on other sites
JoeM 9,305 #4 Posted December 8 Worked good, bolted up, linkage fit nice and ran. 1 Share this post Link to post Share on other sites
ri702bill 10,565 #5 Posted December 8 1 hour ago, JoeM said: Worked good, bolted up, linkage fit nice and ran. Offshore Import to the rescue!!! Share this post Link to post Share on other sites
JoeM 9,305 #6 Posted December 8 1 hour ago, ri702bill said: Offshore Import to the rescue!!! And I am not sure the OE isn't the same 1 Share this post Link to post Share on other sites
ri702bill 10,565 #7 Posted December 8 26 minutes ago, JoeM said: And I am not sure the OE isn't the same But 29 bucks is a lot easier to swallow than the Toro price... 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,840 #8 Posted December 9 People seem to be very happy with Hipa products. https://www.hipastore.com/ 2 Share this post Link to post Share on other sites
JoeM 9,305 #9 Posted December 9 11 hours ago, gwest_ca said: People seem to be very happy with Hipa products. I used a couple two cycle carbs and they were plug and play. Unfortunately, they did not have the one I needed this time. Share this post Link to post Share on other sites
