FLtractor 69 #1 Posted 14 hours ago Evening, When i bought the 856 back in May of this year, the previous owner said the mower deck needs gauge wheels and spindle bearings. Would you be able to tell me how much those should cost, how difficult to find and install them would be? Are those major problems that most likely mean it won’t ever have a usable mowing deck again? Happen to have a link where I could find the spindles and how to install? Any other pieces I’ll likely need to start mowing, perhaps unobtainable parts these days? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,814 #2 Posted 12 hours ago First let's identify the deck. Width of cut - 32" or 36"? Side or rear discharge? How many blades? 2 Share this post Link to post Share on other sites
ri702bill 10,437 #3 Posted 8 hours ago How about some pictures of the deck in question? One from the top, one of the underside... 1 Share this post Link to post Share on other sites
FLtractor 69 #4 Posted 5 hours ago (edited) Will get pictures and measurement's when able to then repost for better assistance. Should have done that already. Thank you both Edited 5 hours ago by FLtractor Share this post Link to post Share on other sites
