Phan 46 #1 Posted 4 hours ago A rod link on snow low C160 - was broken. How can I replace it? Share this post Link to post Share on other sites
Achto 30,070 #2 Posted 4 hours ago A piece of round stock, a vise, a drill & a thread die would be my cure. Could weld it back together? A post in the wanted adds might work. Check with https://a-ztractor.com/ 2 Share this post Link to post Share on other sites
Phan 46 #3 Posted 2 hours ago Thanks you, Achto! I just took for another one for a replacement. 1 Share this post Link to post Share on other sites
peter lena 9,528 #4 Posted 1 hour ago @Phan firm up the connections with washers and grease , for solid smooth operation . would also go after any other linkage , dry / sloppy spot , related linkage / levers can / should move easily , only a suggestion , pete 1 Share this post Link to post Share on other sites
sqrlgtr 1,182 #5 Posted 46 minutes ago 3 hours ago, Phan said: A rod link on snow low C160 - was broken. How can I replace it? ouch must have gotten in a bind somehow Share this post Link to post Share on other sites
Bar Nuthin 1,680 #6 Posted 6 minutes ago (edited) 4 hours ago, Phan said: A rod link on snow low C160 - was broken. How can I replace it? You might be better going with an eye-bolt and some chain. I think that's what Wheel Horse ended up doing in production. There may have even been a service bulletin to that affect. Edited 4 minutes ago by Bar Nuthin 1 Share this post Link to post Share on other sites
