vocivictim 1 #1 Posted November 24 Long time lurker. First time posting. Can anyone help me with the size/length/threads of the two starter mounting bolts for this tractor? Thanks! Share this post Link to post Share on other sites
stevasaurus 23,515 #2 Posted November 24 Not sure this will help. Someone with a 520 should be along before long. 1 Share this post Link to post Share on other sites
JCM 10,411 #3 Posted November 24 3 hours ago, vocivictim said: Long time lurker. First time posting. Can anyone help me with the size/length/threads of the two starter mounting bolts for this tractor? Thanks! WH Part # NN10376 Cap Screw 5/16-18 x 3-1/2 for Onan Starter 2 Share this post Link to post Share on other sites
lynnmor 8,241 #4 Posted November 24 Those bolts are easy to cross thread and difficult to get started. Be sure that you can easily turn them in by hand with the starter off. I mention this because it sounds like you are having difficulty. The bosses with the mounting holes can break, so check that with a bright light. If you are having a problem, report back, perhaps we can help. 1 Share this post Link to post Share on other sites
ri702bill 10,567 #5 Posted November 24 It MAY be worthwhile to run that size tap thru - by hand - to chase the threads.... 3 Share this post Link to post Share on other sites
vocivictim 1 #6 Posted Wednesday at 04:28 PM Resolved. Thank you!! 1 Share this post Link to post Share on other sites
