Another 4x4 - I’ll just leave this here….

[meadowfield 2,855]

My son doesn’t come on here anymore, but here is a 704 that he has been making into a 4x4. 
complete scratch built axle, and a lot of lathe and milling….

I’ll try sort some build pics out! 

[SylvanLakeWH 29,540]

[Pullstart 68,407]

So awesome!  

[Handy Don 14,887]

Some real innovative thinking there! Congrats to your son 👏
Tapping the brake drum shaft for front-drive power is so clever.

Please elaborate on the sources for the front differential and the 90º gearbox amidship!

 

[ri702bill 10,312]

Excellent potential there!

I see what I believe is a 1:1 chain drive to power a right-angle gearbox - also 1:1?? I ask because of the different sized tires front to rear as the circumference of both are different.

Also, is there a one-way clutch hidden in there to allow the tractor to roll in neutral with the brake applied or to semi-address my above question? I take it that the front driveshaft is splined to allow it to lengthen & shorten too, as the shaft centerline is not coincident to the front axle pivot? You got a few bucks tied up there. Off to a good start.

Bill

 

Edited Monday at 10:35 PM by ri702bill

[JoeM 9,072]

4 hours ago, meadowfield said:

and a lot of lathe and milling

and ciphering! 

nice work

[Bill D 2,402]

Wow, just wow!!

[953 nut 62,622]

                                

@meadowfield, your son is a chip off the old block, outstanding workmanship just like your "BENDY" and "C4" Wheel Horses.         

[ebinmaine 75,010]

Awesome! 

[Easton Rich 760]

[Easton Rich 760]

What paint is that? It’s beautiful!

[meadowfield 2,855]

12 hours ago, ri702bill said:

Excellent potential there!

I see what I believe is a 1:1 chain drive to power a right-angle gearbox - also 1:1?? I ask because of the different sized tires front to rear as the circumference of both are different.

Also, is there a one-way clutch hidden in there to allow the tractor to roll in neutral with the brake applied or to semi-address my above question? I take it that the front driveshaft is splined to allow it to lengthen & shorten too, as the shaft centerline is not coincident to the front axle pivot? You got a few bucks tied up there. Off to a good start.

Bill

 

 

it's not 1:1 drive it's under - 20/23, axle ratios and tyre diameters are factored in and ratio is spot on. Driveshaft is splined, but actually only moves 1/8" when the axle tilts. Brake drum works as before - it's a newer version of my 4x4 wheel horse I built 12 years ago.

 

[meadowfield 2,855]

13 hours ago, Handy Don said:

Some real innovative thinking there! Congrats to your son 👏
Tapping the brake drum shaft for front-drive power is so clever.

Please elaborate on the sources for the front differential and the 90º gearbox amidship!

 

 

my 4x4 wheel horses, both use the brake drum, so that was the logical thing to do.  Front differental is a peerless built into a custom casing, Rear box is from a mower.

[kpinnc 15,974]

17 hours ago, meadowfield said:

704 that he has been making into a 4x4. 
complete scratch built axle, and a lot of lathe and milling….

 

Exceptional work! 

 

Small block Kohler tied to a 4WD with a crawler gear? Rugged machine for certain! 

[702854boy 333]

18 hours ago, meadowfield said:

 

 

[meadowfield 2,855]

A few more of the build 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edited 11 hours ago by meadowfield

[ebinmaine 75,010]

Incredible work!

[AlexR 2,274]

Wow that is a lot of machine work and fabrication to do the front axle. The result is really awesome though 

[Wayne0 1,392]

That is some MAD skills!!