edgcooper 12 #1 Posted Tuesday at 04:16 PM Recently purchased a snow plow extension for my plow frame. When installed are the slots in the extension facing up or down when installed on tractor? Which is correct? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,770 #2 Posted Tuesday at 04:48 PM 2 Share this post Link to post Share on other sites
JCM 10,336 #3 Posted Tuesday at 04:48 PM (edited) 34 minutes ago, edgcooper said: Recently purchased a snow plow extension for my plow frame. When installed are the slots in the extension facing up or down when installed on tractor? Which is correct? Up. I had them facing down and it didn't seem right. 1991 520 H 48'' blade Edited Tuesday at 04:52 PM by JCM 2 Share this post Link to post Share on other sites
peter lena 9,485 #4 Posted Tuesday at 08:39 PM @edgcooper another thing , on the back of plow frame , there are 2 levers to trap the slot , cross bar , would suggest adding a couple , of these hitch pin clips , also push them all the way thru to the last big hole end ? that way they will not fall out , also lubricate any related related movement spot pete ,https://boltdepot.com/Product-Details?product=27201&gad_source=1&gclid=CjwKCAiAz_DIBhBJEiwAVH2XwK8HgbKrQfM05qSBIqCLeMSS4mqBQqDOffmW6mtgpO0bjLH7ho2rYxoC-2gQAvD_BwE Share this post Link to post Share on other sites
edgcooper 12 #5 Posted 5 hours ago I have been installing cotter pins in those holes or a 1/4 bolt & nut. Share this post Link to post Share on other sites
