GermanWheelHorse 6 #1 Posted October 30 Hello and greetings from Germany! I just bought an old R26. I want to fix it up and use it. It looks so cool and should do the job fine on my property. But, the seller tried to fix it up a bit. And now i have some problems and questions. Any help is appreciated!!! Carburetor for these, where to get them. They all look different then the one on my mower Then he told me it has two speeds, but it seem like i can only engage one? Also the lever for reverse and forward seems to be out of adjustment, it randomly stops driving (when the carby wants to run) Any Info, manuals or products which might help, please let me know 3 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,734 #2 Posted October 30 Welcome to Red Square. Here is what we have for the model 2-0100 in random order. We have a tractor parts list but no illustrations to go with them. https://www.wheelhorseforum.com/search/?&q=2-0100&type=downloads_file&search_and_or=or&sortby=relevancy Best guess is you have a 1972 model. The V50 (5hp) engine is not listed for this model but little is known about Belgium product. We show a V70-125093A (7hp). Did find a parts list for the engine you have but it was not originally used Wheel Horse in anything. They did use V50 engines in walking mowers but not this one. https://www.partstree.com/models/v50-60148h-tecumseh-engine/ 2 2 Share this post Link to post Share on other sites
GermanWheelHorse 6 #3 Posted October 30 Thanks! I think this will help me for part search. The Internet doesnt tell me much about these Belgium ones. 1 Share this post Link to post Share on other sites
rjg854 12,514 #4 Posted October 30 as you're seeing there's plenty of help here 3 Share this post Link to post Share on other sites
953 nut 62,157 #6 Posted October 30 Hope this old posts from other R-26 owners may be of assistance. 3 Share this post Link to post Share on other sites
GermanWheelHorse 6 #8 Posted October 31 Huge thanks guys! The Repair Manual helps a lot! Let me get a carby kit and refresh this one. I think the Diaphragm is bad on mine. When this works i have to figure out the levers, seems like they dont want to do what they should, i keep you posted! And *prost* bolten is close by! 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,734 #12 Posted November 1 Found this ipl but it looks to be a bit of a mess. Might help Share this post Link to post Share on other sites
GermanWheelHorse 6 #13 Posted Tuesday at 12:40 PM Thanks again. Have some Info's to read through now. Checked the oil, full to the top. So thats on order and will get changed with the right amount of oil. Carby is dismantled and cleaned. just waiting for the membrane (which was rock hard and didnt seal the fuel anymore) Also found needle and seats new. Lets see if i still can get that to work. Also the whole assembly with the rods and such, seem to be mangled with. Try to adjust it, found a video. And then if it runs some more work will wait for me. Found out why i cant change between slow and fast. Its worn out, welding will be needed. 1 Share this post Link to post Share on other sites
