rubbers and hoods

[horseman with no horse 55]

the rubber bumpers on all of my horses are worn or missing. to the point where belts are starting to scrape the seat pans and the pans themselves are rattly. also the little rubber dampeners on the hood for my c120 are missing. on top of that, ive noticed my paint fading and accumulating rust on my 855 hood  . does anyone know where i can get the rubbers for both the hood and seat pans? are they the same as the decks? my deck needs the rubbers to help set the deck height. and any ideas to clean and polish the paint? i also have another issue with my c120 hood, the hood latch rod has pulled through the hood and often makes the hood pop open while mowing (very annoying and somewhat dangerous) i cant tell if theres supposed to be a rubber border on the lip of the hood to help it mate to the dash, and if so whats is part number? are my dash slots wore? i cant tell.

[horseman with no horse 55]

 

[horseman with no horse 55]

[horseman with no horse 55]

you can see the front of the hood vs the top. 

[horseman with no horse 55]

the hood latch & dash in question

[953 nut 62,561]

Here ya go    https://www.steinertractor.com/search/go?ts=custom&w=rubber bumper

[horseman with no horse 55]

https://www.steinertractor.com/FDS232-Seat-to-Spring-Rubber-Bumper

 

 

is this one good?

[c-series don 10,681]

One of our vendors here Brian at K+B Wheel Horse Parts @76c12091520h may also be able to help you. 

[horseman with no horse 55]

the ones on the hood seem to be different

[Brockport Bill 2,072]

the rubber "button" bumpers for the 36 rd mower lift carriage were available recently - i bought them 1-2- yrs ago -- the buffer border spacer along the top edge of back of hoodstands that the hood goes against has also been available online -- but you can also use the door edge material that is used as car door edge guards - --I have found KB as well as AZ both often have the various unusual items that are not generally found elsewhere - both vendors reliable and fair prices and always helpful

[horseman with no horse 55]

only things i cant seem to find is the c120 hood bumpers and the hood border

[Brockport Bill 2,072]

1 hour ago, horseman with no horse said:

only things i cant seem to find is the c120 hood bumpers and the hood border

did you try A-Z on the Red Sq vendors list?

[horseman with no horse 55]

looks like the ones for the seat pan are the same. i guess the only thing left i would want to find is the hood trim. i cant seem to find it on A-Z although it might just be the way that im searching 

[JoeM 9,033]

not cheap but quick and fresh.

 

you will have to double check the size  of the rubber bumpers.there are many different ones on the site. these were used on my hood

 

 

 

[sqrlgtr 1,128]

I just ordered and received 8 of the rubber buttons from Lincoln at A to Z tractor. If I remember right they are just a little over half price compared to Steiners price. 4 for 8.50.

[peter lena 9,492]

@horseman with no horse   related  , possible ideas ? done a lot of  seat issues , and enhancements , hope it helps , pete

 

[Handy Don 14,858]

12 hours ago, horseman with no horse said:

i cant seem to find it on A-Z although it might just be the way that im searching 

Lincoln's business moves high volumes and he has only two employees--the website is rarely current! For best info, calling or email works. 

Edited October 30 by Handy Don

[sqrlgtr 1,128]

12 hours ago, horseman with no horse said:

looks like the ones for the seat pan are the same. i guess the only thing left i would want to find is the hood trim. i cant seem to find it on A-Z although it might just be the way that im searching 

 

@horseman with no horse... try part #5667 should get you where you need to go. Last I checked there were 16 or 17 4 pack sets left.