ebinmaine 75,599 #151 Posted 4 hours ago Just now, Blasterdad said: Direct bolt in, no mods, no drilling. The only thing you need is the longer PTO hoop & lower bracket which just bolts over the forward two holes of the mid Tach-A-Matic. You don't even have to remove the belt or guard, just remove the PTO & friction plate, the one bolt that holds the guard to the block, slide the engine back & over a little,comes right out. You can do this on the older ones too with the battery behind the engine, just take the battery tray off while your under there anyway unbolting the engine. Much appreciated. Specifically, I asked because the topic of swapping the 12 HP from the Ugly Bruce tractor to a 16 HP has come up a couple times. The Ugly Bruce is a C121 so it has that cradle but it's a solid mount. That engine would be used elsewhere. Share this post Link to post Share on other sites
Blasterdad 3,057 #152 Posted 4 hours ago 6 minutes ago, ebinmaine said: That engine would be used elsewhere. 1 Share this post Link to post Share on other sites
