TGooser 0 #1 Posted October 22 (edited) does anyone have any good links or sources to any seals and gaskets or rebuild parts for any of these hydrostatic transmissions? i think i have one that has lost the fight with age on my newly purchased 724Z. i did download the manual from here. i hope someone out there offers something. Thanks its an Eaton model 7 from what i can tell Edited October 22 by TGooser Share this post Link to post Share on other sites
JoeM 8,924 #2 Posted October 23 Not much into 724z but have replaced the eaton 7 with and eaton 11. It bolted right up on my 516H I have been into those hydros and there is not to much that can go wrong. Biggest issue are the damping pistons, the pistons have o rings that will fail and make the performance dip, especially when hot. The eaton manuals are on the web site. It has been years ago, parts are out there but I looked and can not find where I found the material. Might have even been on the bay. not sure. Those were 11 parts. 1 Share this post Link to post Share on other sites
