Ricks 520 6 #1 Posted September 26, 2025 Has anyone repaired or know of someone that repairs steering wheels. I have one that someone heated the center to try and get it off and melted part of the plastic. It's a nice wheel except for that. Share this post Link to post Share on other sites
953 nut 63,546 #2 Posted September 26, 2025 Depending on the extent of the damage you probably could build it up with some two part epoxy. 1 Share this post Link to post Share on other sites
oliver2-44 11,137 #3 Posted September 26, 2025 (edited) I’ve repaired cracks and missing chunks on some of the older wheels. I’ve used JBWeld or PC7 epoxy. The PC7 epoxy is a little thicker and runs less. I spray black spray paint in the epoxy as I mix it. You can use vinyl gloves wetted with water to shape the epoxy. I use a file to shape the epoxy, then finish with sand paper. Edited September 28, 2025 by oliver2-44 7 Share this post Link to post Share on other sites
Retired Wrencher 6,262 #4 Posted September 27, 2025 @Ricks 520 looks like you are covered. Always a lot of good help here enjoy the project. Share this post Link to post Share on other sites
