Will89-B-1 1 #1 Posted September 22 I bought a new (more like very used) Wheel Horse Tractor this spring. It has a mowing deck and a tiller attachment. Not even sure what year or model it is or any information on the attachments. Can I get some help to get started withal of this please? Used the tiller to till up a new garden this spring, used the mower to mow this summer and getting ready to try to figure out the tiller again. Is there a place to buy parts. I had to buy and install bearings for the PTO this spring and instead of looking up the part number the parts store measured the inner and outer rings on the old bearing. I want to both use this tractor and also do a bit of restoration on it. Be nice to figure out some of the safety stuff that previous owners have pulled off. Thanks. Will Share this post Link to post Share on other sites
JoeM 9,037 #2 Posted September 22 (edited) Welcome Will! The parts posse will be along shortly. They will need the info from the tag on the machine and they also like pics. In the vendor section there are businesses that cater to the WH stuff as well as other thing, worth looking at. Also, once you get the model of the machine there is an area that has loads of parts and owner manuals, another good place to visit. Down loads are free. https://www.wheelhorseforum.com/files/ Edited September 22 by JoeM 3 Share this post Link to post Share on other sites
pfrederi 19,076 #3 Posted September 22 Welcome lots of help and info available here once we ID the tractor 2 Share this post Link to post Share on other sites
ebinmaine 74,934 #4 Posted September 22 ALL parts are available. Some new, some used. Pics of the tractor would get us headed the right way. 2 Share this post Link to post Share on other sites
Ed Kennell 43,322 #7 Posted September 22 to the Will. Plenty of help available here as soon as we figure out what you have. Share this post Link to post Share on other sites
Sparky-(Admin) 23,900 #8 Posted September 22 If there’s no model number tag or decals on your new machine then tell if it’s a manual or hydrostatic transmission. If it’s a manual does it have high/low range? Manual attachment lift or hydraulic lift? What brand engine and what’s the horsepower? Of course pictures would really help us! Share this post Link to post Share on other sites
953 nut 62,565 #9 Posted September 22 6 hours ago, Will89-B-1 said: Be nice to figure out some of the safety stuff that previous owners have pulled off. We can help you get the wiring back in good condition when we know what you have. Is yours a single cylinder model or two cylinder? How many horsepower? Model numbers can be found on a sticker under the left side of your seat if it is 1985 or newer. If you don't find it there then look on the hood stand. Share this post Link to post Share on other sites
Retired Wrencher 6,098 #12 Posted September 23 Welcome @Will89-B-1 once we get pictures or if you find the tag with the model number, we can move things along real quickly from there. I hope you enjoy the site. There’s everything you’re gonna need about wheel horse tractors right here. No need to look anywhere else. And also, we have a good group of vendors if you need parts on this site. Share this post Link to post Share on other sites
Pullstart 68,399 #13 Posted September 23 Michigander! Share this post Link to post Share on other sites
JoeM 9,037 #14 Posted September 23 Did we scare him off? Share this post Link to post Share on other sites
Ed Kennell 43,322 #15 Posted September 23 2 hours ago, JoeM said: Did we I scare him off? I don't think he saw you Joe. 1 5 Share this post Link to post Share on other sites
JoeM 9,037 #16 Posted September 24 14 hours ago, Ed Kennell said: I don't think he saw you Joe Ha ha ha 2 Share this post Link to post Share on other sites
Will89-B-1 1 #17 Posted September 27 Hey everybody. I live in downtown Detroit and my tractor is at my garden 200 miles away. I know, not an ideal condition. I just did take pictures with my phone of the model and serial numbers. Now I just have to figure out how to get them off of my phone and on to my computer so I can share them with you all! I move back and forth between the two places and there is no internet service where the garden is....... The damn phone barely works there, You can usually talk over the phone but sharing photos is a 50/50 shot at best. And no Ed and Joe you didn't scare me away. I'm the father of a daughter so talking tractors isn't all that scary! 1 Share this post Link to post Share on other sites
lynnmor 8,141 #18 Posted September 27 Typically you can connect a cable from the phone to the computer and it will show up as another drive. If you post the model of phone i am sure someone here can help you with that. 1 Share this post Link to post Share on other sites
Handy Don 14,869 #19 Posted September 27 6 minutes ago, lynnmor said: If you post the model of phone And whether you use a PC or a Mac... Share this post Link to post Share on other sites
Will89-B-1 1 #20 Posted September 27 Well everybody. With a little help here is the photo of the serial and model numbers of my little beast. Share this post Link to post Share on other sites
Ed Kennell 43,322 #21 Posted September 27 (edited) 1992 520H Go to our manuals section to find the correct manual for your tractor. Edited September 27 by Ed Kennell Share this post Link to post Share on other sites
953 nut 62,565 #22 Posted September 28 The link below will take you to all of the manuals we have for your 520. https://www.wheelhorseforum.com/search/?q=41-20OE03&quick=1&type=downloads_file Share this post Link to post Share on other sites
