Nwebe needs some help

[Will89-B-1 0]

I bought a new (more like very used) Wheel Horse Tractor this spring. It has a mowing deck and a tiller attachment. Not even sure what year or model it is or any information on the attachments. Can I get some help to get started withal of this please? Used the tiller to till up a new garden this spring, used the mower to mow this summer and getting ready to try to figure out the tiller again. Is there a place to buy parts. I had to buy and install bearings for the PTO this spring and instead of looking up the part number the parts store measured the inner and outer rings on the old bearing. I want to both use this tractor and also do a bit of restoration on it. Be nice to figure out some of the safety stuff that previous owners have pulled off. Thanks. Will

[JoeM 8,578]

Welcome Will!

The parts posse will be along shortly. They will need the info from the tag on the machine and they also like pics.

In the vendor section there are businesses that cater to the WH stuff as well as other thing, worth looking at. 

 

Also, once you get the model of the machine there is an area that has loads of parts and owner manuals, another good place to visit. Down loads are free. 

https://www.wheelhorseforum.com/files/

Edited 19 hours ago by JoeM

[pfrederi 18,812]

Welcome lots of help and info available here once we ID the tractor

[ebinmaine 73,714]

 

 

ALL parts are available. Some new,  some used. 

 

Pics of the tractor would get us headed the right way.  

[SylvanLakeWH 29,011]

[rjg854 12,384]

[Ed Kennell 42,505]

to the  Will.     Plenty of help available here as soon as we figure out what you have.

[Sparky-(Admin) 23,531]

  If there’s no model number tag or decals on your new machine then tell if it’s a manual or hydrostatic transmission. If it’s a manual does it have high/low range? Manual attachment lift or hydraulic lift?  What brand engine and what’s the horsepower? 
  Of course pictures would really help us! 
 

 

[953 nut 61,081]

6 hours ago, Will89-B-1 said:

Be nice to figure out some of the safety stuff that previous owners have pulled off.

We can help you get the wiring back in good condition when we know what you have.

Is yours a single cylinder model or two cylinder?     

How many horsepower? 

Model numbers can be found on a sticker under the left side of your seat if it is 1985 or newer. If you don't find it there then look on the hood stand.

[parsonsponyz 243]

[oliver2-44 10,839]

[Retired Wrencher 5,959]

Welcome @Will89-B-1 once we get pictures or if you find the tag with the model number, we can move things along real quickly from there. I hope you enjoy the site. There’s everything you’re gonna need about wheel horse tractors right here. No need to look anywhere else. And also, we have a good group of vendors if you need parts on this site.

[Pullstart 67,438]

Michigander!