Pullstart 67,035 #1 Posted August 7 This was recently purchased and once I saw the custom hitch, I was even more excited about it! This is supposed to be a self powered tiller that slides into the sleeve hitch of an RJ. The PO had built a mid mount draw bar for his C series machine, and the lift bar still slides into the sleeve hitch, but is on a shackle of sorts. Yesterday I cleaned the points and fuel system. I have fuel and spark. I think my points gap is off, it only fires when it wants to. I’ll get to that soon. 9 3 Share this post Link to post Share on other sites
WHX?? 51,889 #2 Posted August 7 44 minutes ago, Pullstart said: my points gap is off, Just for grins try setting the points at 18. Dan turned a hard starter into a two puller on the Mclean doing that. 4 Share this post Link to post Share on other sites
Pullstart 67,035 #3 Posted August 7 44 minutes ago, WHX?? said: Just for grins try setting the points at 18. Dan turned a hard starter into a two puller on the Mclean doing that. I haven’t even checked yet! I figured I’d clean and try it before messing with everything. 1 Share this post Link to post Share on other sites
ebinmaine 72,954 #4 Posted August 7 Cool little machine. 1 Share this post Link to post Share on other sites
Pullstart 67,035 #5 Posted August 7 Last night, I gave all the tins and the piano hinges a little WD40 bath and rubbed it in. It looks great, and the hinge started working easier too! I’ll probably do it a couple more times as well. Let it work. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,518 #6 Posted August 7 This one? 1 Share this post Link to post Share on other sites
