horseman with no horse 29 #1 Posted July 12 my lt/10 rims are shot and the spindles are so short i cannot find rims that will fit and allow me to clip the wheel on, not only that but one of my spindles is shot with a fat rust pit. i need me a decent set of rims and spindles, anyone got any? Share this post Link to post Share on other sites
ri702bill 9,348 #2 Posted July 12 Got a pictute of the tractor?? my son had picked up a 10 HP Sears - it no longer runs (since about 2010) it is in dry outside storage. Bill Share this post Link to post Share on other sites
horseman with no horse 29 #3 Posted July 14 ill get some for sure, in the mean time heres what it looks like on the interscreen Share this post Link to post Share on other sites
horseman with no horse 29 #4 Posted July 14 is this what your son has? Share this post Link to post Share on other sites
ri702bill 9,348 #5 Posted July 15 I need to look it over - it was repainted black, no decals. It is at the other house - I'll be there in the morning.... Share this post Link to post Share on other sites
ri702bill 9,348 #6 Posted Wednesday at 06:25 PM OK - I looked this morning - it seems to be the same model..... I need to dig it out of the pile - there are things around & on top of it. Please PM me if you want me to proceed - I need to check that the front spindles & wheels are OK.... the parts are of no good to me, you can have them for free. BUT they are too big to fit a flat rate box, so it would be either UPS or Fedex. I figure it would set you back about $40-$50... RI to Michigan. Bill 1 Share this post Link to post Share on other sites
